Motorcycle mechanic school in the philippines?

[MDAFFSTER]

I want to be a motorcycle mechanic, where can i study for that in the philippines? What schools offer that course? Ty, pls help me....

[wakywakyme]

I want to be a motorcycle mechanic, where can i study for that in the philippines? What schools offer that course? Ty, pls help me....

same question here.

do they offer this kind of training in TESDA kaya?

[RCC]

try enrolling in a technical school offering automotive courses. The priciples are the same. For the other areas not covered, you'll eventually acquire them through experience.

[ryioki]

I want to be a motorcycle mechanic, where can i study for that in the philippines? What schools offer that course? Ty, pls help me....

sir d2 sa my sauyo nova qc meron,pero i think motorcycle engine overhauling lng un tsaka ung elecricals nya....pero if your want d full course try mu sa tesda kung my open cla...

[MDAFFSTER]

sir d2 sa my sauyo nova qc meron,pero i think motorcycle engine overhauling lng un tsaka ung elecricals nya....pero if your want d full course try mu sa tesda kung my open cla...

ano pong exact name ng school? i think thats wat i want, ty, pls reply..

[MDAFFSTER]

same question here.

do they offer this kind of training in TESDA kaya?

meron sa tesda automotive mechanic lang yata yun, but unfortunately i cant study sa tesda, im not a filipino citizen kc.. i dont mind enrolling in a privte vocational school even if i have to pay more, as long as they have the course im looking for, pls help po... ty..

[genezide13]

sa tesda meron .. motorcycle mechanic

sa electron tech ako nag aral ng pag memekaniko.. hindi maayos ang turo ( sucat branch )

pero kahit papano may natutunan naman ako.. kahit konti..

[MDAFFSTER]

sa tesda meron .. motorcycle mechanic

sa electron tech ako nag aral ng pag memekaniko.. hindi maayos ang turo ( sucat branch )

pero kahit papano may natutunan naman ako.. kahit konti..

ty for the info, i really apprieciate it.. nde ako pwde sa tesda because nde ako filipino citizen, sayang! but sir yun sa electron tech n cnasbi mo, talagang motorcycle mechanic yun? or automotive mechanic yan course mo? because gs2 ko tlga motorcycle mechanic lang talaga, pls reply.... ty so much sir..

[ryioki]

ty for the info, i really apprieciate it.. nde ako pwde sa tesda because nde ako filipino citizen, sayang! but sir yun sa electron tech n cnasbi mo, talagang motorcycle mechanic yun? or automotive mechanic yan course mo? because gs2 ko tlga motorcycle mechanic lang talaga, pls reply.... ty so much sir..

really...they dont accept foreigners....?naka pag inquire na po ba kyo sir?...... location nyo po.....electron tech din po ung cnasabi ko eh....

[ryioki]

sa tesda meron .. motorcycle mechanic

sa electron tech ako nag aral ng pag memekaniko.. hindi maayos ang turo ( sucat branch )

pero kahit papano may natutunan naman ako.. kahit konti..

naku...yari tyo jan..nakapag enroll n ko.....panung pngit ang turo?

[knightwing]

Mga Sir taga laguna ako and i am also interested sa topic na ito. saan po kaya ang pinakamalapit dito na pwede ako mag enrol. pwede bang mag post kau ng list nag school. salamat po

[kornelieux]

subscribing.

kahit man lang short/crash course sana interested po ako.

[genezide13]

naku...yari tyo jan..nakapag enroll n ko.....panung pngit ang turo?

im an electron graduate eh.. mas marunong pa ako sa teacher.. 4k pa naman almost yung fee..

hindi malinaw ang turo puro skip.. hindi matapos sa isang bagay .. kalahati sa engine, tapos wiring naman.. tapos ganito.. tapos ganyan...

pag natuto ka na.. tirahin mo agad ang motor mo.. malaking tulong ding para matutoto ka.. atleast motor mo ang masisira.. before ka mag on hand.. may alam ka na..

[40kph]

balak ko den to.. sabi nga sakin mag tesda daw.. ako.. automotive.. dahil parehas nga din daw ang principle.. pinaliit lang ang makina.. pero i want motorcycle mechanic as in yun ang ituturo.. kasi un talaga ang lab ko..

[kan_2_tero]

malamang wala!

unless makakuha ka ng trabaho sa planta, pero production work yun!

kung sa maynila ka, mag enrol ka sa don bosco makati o mandaluyong sa kanilang vocational courses. mayroon silang automotive, pare pareho ang prinsipyo ng combustion engines, at electrical. yung ibang bagay pickapin mo na lang sa ibang lugar, tulad ng welding para sa frame, etc

[jaguar08]

mgabros, try nyo contact ang suzuki philippines, may inooffer silang moto mechanic course for 15 days then magkakameron pa kayo ng service manual ng motorcycle....nag inquire ako throu phone last 2 weeks ago kasi gusto ko magkaroon ng servcie manual handbook ng raider 150..hindi po yon katulad ng post sa mcp na parts illutration lang.....try nyo rin mga bro, bili kayo ng manila bullitin sunday edition. may panorama don lagi, hanapin nyo yong PennFoster...home study eto..pwede kayo matapos ng 1 course na nasa bahay lang o may previous job kayo sa ngayon....sa ngayon im taking q power plant engineering through PennFoster(formerly ICS).......sana nakatulong

[choc2x]

You can try this, some dude gave me a flyer

Electron Technical Center Corp
They offer motorcycle mechanic training!

This is located in Rosario, Pasig.. Along C. Raymundo

Contact details 642-3150/286-0341, for any other questions just call them..

[MDAFFSTER]

[QUOTE=ryioki;3902675]really...they dont accept foreigners....?naka pag inquire na po ba kyo sir?...... location nyo po.....electron tech din po ung cnasabi ko eh....

american citizen kc ko, d2 ko s us pinanganak at wla kong fil pasport at fil birth certificate, nde kc ko dual citizen, parents ko filipino, i studied ther s pinas nung college ako, sbi ng mga relatives ko n ng inquire pra s kin s tesda, kelangan dw fil citizen k.. try ko nlng s electron tech n cnasbi mo po, ty... sna nga mron p clang motorcycle mechanic course..

[pangserbis_lang]

I want to be a motorcycle mechanic, where can i study for that in the philippines? What schools offer that course? Ty, pls help me....

try Meralco Foundation Institute along robinsons gale.They offer almost all types of short courses from computer programming to basic driving.

source:
mfi (click here)

[kenrockz]

Sir we own a TESDA school pero dito sa pangasinan, Based on my experience po kahit sino pwede mag aral sa TESDA, kase skills trainining po sya, but if you will undergo a PGMA or PGS scholarship dapat pinoy ka nga with papers pero pag interested individual pwede po mag enroll, meron din naman FSTP for foreign students . With regards to motorcycle tech courses eto po details also ang turo kase modular mga boss kaya parang putol putol after 1 module basta approved nang department head pwede na ituro kaya pag masmagaling ka sa teacher eh sayang nga naman ang fee, Anyway sir meron po tayong course para sa atin we call it "Motor Cycle/Small engine Servicing NCII" eto sir details nang matututunan"

1. Obtain and convey workplace information.
2. Complete relevant work related documents.
3. Participate in workplace meeting and discussion.
4. Describe and identify team role and responsibility in a team.
5. Describe work as a team member.
6. Integrate personal objectives with organizational goals.
7. Set and meet work priorities.
8. Maintain professional growth and development.
9. Identify hazards and risks.
10. Evaluate hazard and risks.
11. Control hazards and risks.
12. Maintain occupational health and safety awareness.
13. Identify appropriate sealant/ adhesive.
14. Prepare surface for sealant/ adhesive application.
15. Apply sealant/adhesive evenly.
16. Store unused and dispose used sealant/adhesive.
17. Prepare vehicle for driving.
18. Move and position vehicle.
19. Check the vehicle.
20. Select measuring instrument
21. Carry out measurement and calculations.
22. Maintain measuring instruments.
23. Identify/accessed manuals and interpret data and specification.
24. Apply information accessed in manual.
25. Store manual.
26. Identify type of lubricant/coolant.
27. Use and apply lubricant/coolant.
28. Perform housekeeping activities
29. Inspect/clean tools and work area.
30. Store/arrange tools and shop equipment.
31. Dispose wastes/used lubricants.
32. Report damaged tools/equipment.
33. Perform engine tune-up.
34. Check motorcycle/ small engine component system and make minor adjustments and replacements.
35. Prepare maintenance report.
36. Adjust/replace throttle cable/choke cable
37. Replace gasoline fuel filter
38. Drain gasoline fuel tank
39. Replace fuel control valve
40. Clean fuel tank/filter
41. Inspect/replace fuel lines.
42. Inspect/replace fuel pump.
43. Inspect air cleaner assembly
44. Inspect turbo system.
45. Inspect fuel ignition system.
46. Inspect engine oil level.
47. Check oil pump.
48. Check oil line and cables.
49. Check 2T oil pump.
50. Check oil filter.
51. Replace oil filter.
52. Inspect oil cooler system.
53. Check oil pressure.
54. Check/adjust/ replace spark plug.
55. Check/replace ignition coil.
56. Inspect/adjust contact point/ condenser.
57. Adjust ignition timing
58. Diagnose C.D.I., magneto/C.D.I battery
59. Adjust mechanical advancer
60. Inspect muffler.
61. Repair muffler dents.
62. Check muffler clamp, gasket and connector.
63. Clean exhaust canister.
64. Clean exhaust baffle pipe.
65. Check electronic/ mechanical power valve.
66. Check smoke emission.
67. Check suspension play.
68. Check swing arm.
69. Inspect front fork inner/ outer tube.
70. Adjust suspension.
71. Inspect suspension linkages (lower and upper).
72. Overhauling front fork.
73. Inspect motorcycle brake system components.
74. Carry out adjustment and repair.
75. Diagnose ABS system
76. Perform final road test.
77. Inspect tire condition.
78. Check rim lock.
79. Check wheel bearings/hub damper.
80. Check spoke tension.
81. Perform wheel alignment
82. Perform wheel balancing.
83. Inspect/Adjust clutch cable/ push rod.
84. Adjust clutch lever-free play.
85. Check centrifugal shoe/drum.
86. Repair clutch master cylinder.
87. Repair clutch secondary cylinder.
88. Lubricate clutch release screw assembly.
89. Perform clutch overhauling.
90. Check gear backlash.
91. Check fuses
92. Check battery
93. Check lighting system/warning devices.
94. Check wiring continuity/ insulation.
95. Check starting system.
96. Check charging system and replace components.
97. Check switches/coupler.
98. Inspect warning devices.
99. Inspect safety wiring/relay/accessories.
100. Check speedometer/tachometer, engine sensors and fuel gauges.
101. Inspect/check final drive components.
102. Carry out diagnostic procedure.
103. Inspect, check and service cooling system components.
104. Diagnose faults from symptoms and decide preferred action.
105. Repair cooling system components.
106. Disconnect / detach engine components.
107. Pull out engine.
108. Disassemble engine.
109. Replace/Repair engine components.
110. Inspect transmission components.
111. Replace/repair transmission components.
112. Reassemble engine.
113. Connecting external accessories of engine
114. Test engine performance

ENTRY REQUIREMENTS

Trainees or students should possess the following requirements:
- can communicate both oral and written;
- physically and mentally fit;
- with good moral character; and
- can perform basic mathematical computation.

Hope makatulong po ito.. Good Luck sa mga magaaral. Advise lang make sure po na TESDA certified ang pagaaralan nyo po mga sir, kase pag hindi mas sayang din po ang pera ninyo...

[MDAFFSTER]

Sir we own a TESDA school pero dito sa pangasinan, Based on my experience po kahit sino pwede mag aral sa TESDA, kase skills trainining po sya, but if you will undergo a PGMA or PGS scholarship dapat pinoy ka nga with papers pero pag interested individual pwede po mag enroll, meron din naman FSTP for foreign students . With regards to motorcycle tech courses eto po details also ang turo kase modular mga boss kaya parang putol putol after 1 module basta approved nang department head pwede na ituro kaya pag masmagaling ka sa teacher eh sayang nga naman ang fee, Anyway sir meron po tayong course para sa atin we call it "Motor Cycle/Small engine Servicing NCII" eto sir details nang matututunan"

1. Obtain and convey workplace information.
2. Complete relevant work related documents.
3. Participate in workplace meeting and discussion.
4. Describe and identify team role and responsibility in a team.
5. Describe work as a team member.
6. Integrate personal objectives with organizational goals.
7. Set and meet work priorities.
8. Maintain professional growth and development.
9. Identify hazards and risks.
10. Evaluate hazard and risks.
11. Control hazards and risks.
12. Maintain occupational health and safety awareness.
13. Identify appropriate sealant/ adhesive.
14. Prepare surface for sealant/ adhesive application.
15. Apply sealant/adhesive evenly.
16. Store unused and dispose used sealant/adhesive.
17. Prepare vehicle for driving.
18. Move and position vehicle.
19. Check the vehicle.
20. Select measuring instrument
21. Carry out measurement and calculations.
22. Maintain measuring instruments.
23. Identify/accessed manuals and interpret data and specification.
24. Apply information accessed in manual.
25. Store manual.
26. Identify type of lubricant/coolant.
27. Use and apply lubricant/coolant.
28. Perform housekeeping activities
29. Inspect/clean tools and work area.
30. Store/arrange tools and shop equipment.
31. Dispose wastes/used lubricants.
32. Report damaged tools/equipment.
33. Perform engine tune-up.
34. Check motorcycle/ small engine component system and make minor adjustments and replacements.
35. Prepare maintenance report.
36. Adjust/replace throttle cable/choke cable
37. Replace gasoline fuel filter
38. Drain gasoline fuel tank
39. Replace fuel control valve
40. Clean fuel tank/filter
41. Inspect/replace fuel lines.
42. Inspect/replace fuel pump.
43. Inspect air cleaner assembly
44. Inspect turbo system.
45. Inspect fuel ignition system.
46. Inspect engine oil level.
47. Check oil pump.
48. Check oil line and cables.
49. Check 2T oil pump.
50. Check oil filter.
51. Replace oil filter.
52. Inspect oil cooler system.
53. Check oil pressure.
54. Check/adjust/ replace spark plug.
55. Check/replace ignition coil.
56. Inspect/adjust contact point/ condenser.
57. Adjust ignition timing
58. Diagnose C.D.I., magneto/C.D.I battery
59. Adjust mechanical advancer
60. Inspect muffler.
61. Repair muffler dents.
62. Check muffler clamp, gasket and connector.
63. Clean exhaust canister.
64. Clean exhaust baffle pipe.
65. Check electronic/ mechanical power valve.
66. Check smoke emission.
67. Check suspension play.
68. Check swing arm.
69. Inspect front fork inner/ outer tube.
70. Adjust suspension.
71. Inspect suspension linkages (lower and upper).
72. Overhauling front fork.
73. Inspect motorcycle brake system components.
74. Carry out adjustment and repair.
75. Diagnose ABS system
76. Perform final road test.
77. Inspect tire condition.
78. Check rim lock.
79. Check wheel bearings/hub damper.
80. Check spoke tension.
81. Perform wheel alignment
82. Perform wheel balancing.
83. Inspect/Adjust clutch cable/ push rod.
84. Adjust clutch lever-free play.
85. Check centrifugal shoe/drum.
86. Repair clutch master cylinder.
87. Repair clutch secondary cylinder.
88. Lubricate clutch release screw assembly.
89. Perform clutch overhauling.
90. Check gear backlash.
91. Check fuses
92. Check battery
93. Check lighting system/warning devices.
94. Check wiring continuity/ insulation.
95. Check starting system.
96. Check charging system and replace components.
97. Check switches/coupler.
98. Inspect warning devices.
99. Inspect safety wiring/relay/accessories.
100. Check speedometer/tachometer, engine sensors and fuel gauges.
101. Inspect/check final drive components.
102. Carry out diagnostic procedure.
103. Inspect, check and service cooling system components.
104. Diagnose faults from symptoms and decide preferred action.
105. Repair cooling system components.
106. Disconnect / detach engine components.
107. Pull out engine.
108. Disassemble engine.
109. Replace/Repair engine components.
110. Inspect transmission components.
111. Replace/repair transmission components.
112. Reassemble engine.
113. Connecting external accessories of engine
114. Test engine performance

ENTRY REQUIREMENTS

Trainees or students should possess the following requirements:
- can communicate both oral and written;
- physically and mentally fit;
- with good moral character; and
- can perform basic mathematical computation.

Hope makatulong po ito.. Good Luck sa mga magaaral. Advise lang make sure po na TESDA certified ang pagaaralan nyo po mga sir, kase pag hindi mas sayang din po ang pera ninyo...

ty, i apprieciate ur reply, can i knw d name of the school? & tel# ? im gona try 2 enroll at electron tech wen i go on my vacation dyn s pinas, pg d ako satisfied, try ko s school nyo, khit province, mg board nlng cguro ko s apartmnt or sumthing.. tma k pwd ako s tesda certified school, but nde ako pwd s pgma scholarship program. again ty..

[kenrockz]

I think sir any TESDA certified school pwede, Pero mas maganda po talaga if you go straight to TESDA mismo yung mga training center kase mas complete ang gamit duon, if ever po ba saan ang location nyo para macheck ko kung saan pinaka malapit na TESDA center sa inyo.

[MDAFFSTER]

I think sir any TESDA certified school pwede, Pero mas maganda po talaga if you go straight to TESDA mismo yung mga training center kase mas complete ang gamit duon, if ever po ba saan ang location nyo para macheck ko kung saan pinaka malapit na TESDA center sa inyo.

s mkti bel air ang fmily house nmin s pinas.. ty..

[Stikfas]

gusto ko din mag enroll sir. malapit lng din sa makati bel-air.

salamat

[mhon_57]

automotive mechanic ako hinde naman nagkalayo ang principle ng motorcycle sa makina ng mga sasakyan, my mga special tools lang ang motor na ginagamit katulad sa honda mag tangal lang clutch lining kailangan mo special tools. kong nag aral ka ng automotive madali lang indentihin yun. yung iba nga dyan sa tingin ko hinde naman nag aral lakas ng loob lang gumawa hehehe kala mo magaling talaga. ito lang payo ko kong my kilala kayong shop ng motor tambay lang kayo doon at manood ng ginagawa nila, yan dati ang ginawa ko kasi hinde pa ako talaga naka bukas ng makina ng motor, nong nakita kuna madali lang pala hehehe kaya ngayon ako na gumagawa ng motor ko, bili nalang ako ng mga special tools.