guys i have this helmet sayang naman di ko na magamit kasi amoy pawis na sya pang angkas sana kaso nakakahiya naman pagamit any suggestions paano maalis yung amoy ?:? :? :?

Bro,
Try mong ibilad sa araw kung hindi washable yung foam. Para sipsipin yung amoy pawis then spray mo ng cologne or perfume. huwag mong munang pagamit until magbago yung amoy.

if your helmet's foam inside is removable, try mo labhan

if not, tama yun, bilad mo sa araw

then kapag gagamitin mo na,
always use face mask or maglagay ka panyo sa ulot para iwas pawis

bili ka pure baking soda, sa mga grocery meron nito, yung Arm & Hammer ang tatak, mix 1 tbsp of baking soda and 1 tbsp of downy to 1 to 2 cups of water in a bowl... get a sponge and soak it with the mixture, squeeze the sponge to remove excess water then wipe the insides of your helmet... mapapansin mo dudumi yung sponge, do this a couple of time hangang mapansin mo na wala ng lumilipat na dumi or stain sa sponge, then saka mo ibilad sa araw para matuyo... after matuyo, you'll notice that are white specks, mga natuyong baking soda, you can leave them be or just use a vacuum cleaner to remove them... sigurado tanggal yung mabahong amoy sa helmet mo, mabango at hindi rough or matigas yung mga tela sa loob dahil sa downy... then kung gusto mo pang mas mabango, sprayan mo pa ng perfume or colonge tulad ng sabi ni sir jfvvrooom1... spray only with perfume after you've done the baking soda procedure, just spraying with perfume without cleaning with baking soda will only mask the stink and would eventually smell bad after a week or so..much worse, mas mabantot pa... or if you're using a headliner/bonet/balaclava, much better kung duon mo spray yung perfume kesa sa loob ng helmet...

thanks guys for the helpful tips maraming salamatmga kapatid try ko gawin asap

sa grocery ng SM fairview ako nakabili ng ARM and HAMMER na baking soda... check mo sa google about it... maganda din panlinis ng chrome at stainless ang baking soda...

bakin soda is very effective. try it first then spray it with lysol anti bac to kill those odor causing bacteria then use a balaclava so that your sweat won't stick to your helmet pads. i've been using a balaclava since i got my shoei about three months ago and the helmet still smells fresh.

sa grocery ng SM fairview ako nakabili ng ARM and HAMMER na baking soda... check mo sa google about it... maganda din panlinis ng chrome at stainless ang baking soda...

Maganda ring pang toothbrush magaling sa gums.

better to use lysol (instead of cologne) after cleaning with soda then dry it under the sun.

maganda din panlinis ng chrome at stainless ang baking soda...

same procedure din po ba like in cleaning the helmet? thanks.

same procedure din po ba like in cleaning the helmet? thanks.

Di na po siguro kailangan ng downy ang bakal:D

just like what our fellow forummers said, wash it at patuyuin under the sun tpos gumamit ka na lagi ng balaclava or bonnet para di na mangamoy helmet mo....

balaclava manay. ugalin ang pagsusuot nito bago maghelmet. mas cute ka pa tingnan. :)

guys ginawa ko na nabawasan ang amoy pawis
siguro dapat ulititn ko pa ulit then bilad sa araw

careful lang sa masyadong pagbilad sa araw...baka maging marupok na ang styro liner and render the helmet useless....

Di na po siguro kailangan ng downy ang bakal:D

i was referring to the baking soda!

Always wear a balaclava period!

hindi removable ang foam ng helmet ko. na try ko 'yong baking soda tip for many times, effective naman. kaya lang last time, sinubukan ko labhan hjc helmet ko using ariel and water. ayon tanggal ang rubber lining sa base ng helmet. nagsisi tuloy ako. ano kaya effective adhesive para maattach ko uli?

hindi removable ang foam ng helmet ko. na try ko 'yong baking soda tip for many times, effective naman. kaya lang last time, sinubukan ko labhan hjc helmet ko using ariel and water. ayon tanggal ang rubber lining sa base ng helmet. nagsisi tuloy ako. ano kaya effective adhesive para maattach ko uli?

Madali talagang matanggal ang rubbing linning sa ilalim ng helmet na HJC, ganyan din kasi yung problem ko with my CL12. Dikit mo lang ng Bulldog super glue yung pang rubber at solve na ang problem mo. Overtime mababawasan din yung dikit ng ibang rubber parts sa hard shell ng helmet kaya dikit lang uli. HTH.

guys ginawa ko na nabawasan ang amoy pawis
siguro dapat ulititn ko pa ulit then bilad sa araw
gawin mo extra strength yung baking soda solution by putting more baking soda to the solution.

guys i have this helmet sayang naman di ko na magamit kasi amoy pawis na sya pang angkas sana kaso nakakahiya naman pagamit any suggestions paano maalis yung amoy ?:? :? :?
sir lagi kang magshampoo para di bumaho head gear mo hehehe...joke lang po sir, sa min po kasi meron kaming conditioning room na may dehumidifying machine, kapag dumating na kami ipinapatong namin sa machine ang helmet namin para totally ma-absorb ang mga moisture na nasa helmet, maghapon yun so sa pag-uwi namin wala nang amoy yung helmet kasi totally dry na sya pati amoy nawawala na rin. pareho din siguro yun ng nakabilad sa araw. piliin mo yung perfume na gagamitin mo kasi minsan di match ang combination ng amoy natin at ng perfume so ang kinalalabasan maasim or hindi maganda ang amoy.dapat mapatay muna ang mga germs or bacteria na present bago mo lagyan ng perfume.sila ang nagpoproduce ng hindi magandang amoy.

Madali talagang matanggal ang rubbing linning sa ilalim ng helmet na HJC, ganyan din kasi yung problem ko with my CL12. Dikit mo lang ng Bulldog super glue yung pang rubber at solve na ang problem mo. Overtime mababawasan din yung dikit ng ibang rubber parts sa hard shell ng helmet kaya dikit lang uli. HTH.

Salamat sa 'yo bro Ichtus Janz. Cge e try ko.

Babad mo sa Araw then Lysol...

Babad mo sa Araw then Lysol...



done it bro pag katapos linisisn ng baking soda and joy binilad ko then nilagyan ko ng lysol ok na di na mabaho salamt ulit mga utol!!!!!:clap: :clap: :clap:

ung baking powder po ba at baking soda eh magkaiba o pareho lang?
baking powder po kasi nabili ko eh pwede po ba tong gamitin? t.y.

You should try to look for this helmet deodorant that I use for my helmets. It is called Helmet care. I bought it from 2211 works in malate...

You should try to look for this helmet deodorant that I use for my helmets. It is called Helmet care. I bought it from 2211 works in malate...

how much po sir? and pano po ginagamit? para po bang shampoo?

Its about 450 for a bottle. It sprays out foam that absorbs all the dirt from the helmet lining and then you simply wipe off the dirty foam...it smells great too!

I usually use packs of silica gel, ilagay lahat sa loob ng helmet tapos ipasok sa helmet bag or cover. The next day amoy bago na uli.

ako laba then downy. then i put a bar of soap sa loob pag di ko ginagamit para mabango. di ako gumagamit ng lysol dahil nahihilo ako sa amoy.

how about the other brands or helmet/gears deodorant effective ba? medyo mabaho na yung helmet ko ngayon dahil lagi naguulan... i would like to try the silica gel and baking soda solution too...

Ang the best po jan,,, para mawala yung amoy pawis ng helmet... gumamit po kayo ng motorspray. . . try nyo po...:banana:

motospray nga. or lagi magsuot ng balaclava

wash it thoughroughly, let it dry, and add motorspray...

and use a balaclava...

wash it thoughroughly, let it dry, and add motorspray...

and use a balaclava...

+1

Ito po extracted ko lang,I hope makatulong...

Paint the screws and clips with clear nail polish (tell you why latter) Fill a big bucket with warm water, add 1/2 cup powdered Borax, & 1/2 cup laundry bleach weight the helmet so the whole thing is immersed. Let soak overnight, rinse well with a little fabric softener added allow to dry and say goodbye to the smell. Any really bad discoloration of the foam can be scrubbed out with raw bleach and a toothbrush.

The nail polish prevents the screws and clips from rusting. Remove and wash the comfort liner around the brow of the helmet after daily use of the helmet.:s

baking s0da kaya paps? mm hindi kaya lumambot,styr0 nun pag 0vernyt babad? :?

^
same question. hindi nga kaya madegrade ang foam/styro nun?

balaclava lang na laging nilalabahan and moto spray then mag shampoo ka po ng mabango talaga adn YATAP! good bye amoy pawis:D

before ang baho ng helmet ko...

pero after using balaclva and motorspray after i washed the foam di na ulit nangamoy.

imaginin mo mag rubber shoes ka then play basketball tapos wala medyas, kadiri diba?

so balaclava + motorspray then once a month siguro linis ng baking soda, or even quarterly.

bili ka pure baking soda, sa mga grocery meron nito, yung Arm & Hammer ang tatak, mix 1 tbsp of baking soda and 1 tbsp of downy to 1 to 2 cups of water in a bowl... get a sponge and soak it with the mixture, squeeze the sponge to remove excess water then wipe the insides of your helmet... mapapansin mo dudumi yung sponge, do this a couple of time hangang mapansin mo na wala ng lumilipat na dumi or stain sa sponge, then saka mo ibilad sa araw para matuyo... after matuyo, you'll notice that are white specks, mga natuyong baking soda, you can leave them be or just use a vacuum cleaner to remove them... sigurado tanggal yung mabahong amoy sa helmet mo, mabango at hindi rough or matigas yung mga tela sa loob dahil sa downy... then kung gusto mo pang mas mabango, sprayan mo pa ng perfume or colonge tulad ng sabi ni sir jfvvrooom1... spray only with perfume after you've done the baking soda procedure, just spraying with perfume without cleaning with baking soda will only mask the stink and would eventually smell bad after a week or so..much worse, mas mabantot pa... or if you're using a headliner/bonet/balaclava, much better kung duon mo spray yung perfume kesa sa loob ng helmet...

Buti na lang may MCP! Salamat po dito sir. I'll try this technique soon. Baho na.:D

is motorspray use purposely for helmet?

Meron helmet liner spray tol. Foaming Helmet Care Spray cleans, deodorizes and protects helmet linings with an enzyme formula that eats the bacteria that causes odor. My uncle got me one and it really works!:rolleyes:

san naman po nakakabili nito?

from 2211 works tol.:*