I have a pole position armored riding mesh jacket.
Pano ba to linisin, I'm kinda stumped right now.

here's what i do...remove the armors. soak the jacket in water with soap for about 10 mins only. then hand wash it gently. after which hang it using a hanger and wash it down with a hose..

yup...that's the way to do it....if you dont have a hose, just make sure you rinse it well with clean water...and hang it up to dry....

same here. kaso wash lang soap then banlaw with hose.

hndi ko p kasi nalalabahan ung MESH ko kaya nde ko p alm labahan kaya gagawin ko rin ung mga suggestion nyo hehe,2times ko p lang xa na susuot hehe.

Try mo mild soap lang bro. wag ung powder na may mga clorox content. mas ok kung bar lang perla try mo..

ako gamit ko powder lang na may kasama nang downy. smells good at lambot pa ng feeling. hang to dry lang ha. not under the sun..

Pano yun, hindi po removal ung mga plastics. Full body armor po un, ung nakatahi yung mismong armor sa mesh.

why not try to DRY CLEAN your jacket instead. . .

i agree with dry clean, not unless campante ka na di kupas yan at di masira, dry clean is a good way to protect your investment. I've seen even RS taichi kase na kumukupas eh.

Pano yun, hindi po removal ung mga plastics. Full body armor po un, ung nakatahi yung mismong armor sa mesh.



check mo muna yung tag nya kung pwede dry clean.
hmmm. baka naman yung sinasabi mo na nakatahi eh yung nasa labas ng jacket. halos lahat kasi ng armored jackets eh removable ang armors. check mo maigi usually may opening yan. naka velcro lang

Eto po ung tinutukoy ko. HIndi po tlaga removable ang pads.

http://motorcyclephilippines.com/forums/showthread.php?t=77822

Eniweiz, salamat po sa alahat ng nagreply.

ah body armor pala yan? well then it doesn't hurt if kung mabasa yung plastics..

Sir yan na ba yung version 2 ng pole position safety jacket? how much mo nabili?

Sir yan na ba yung version 2 ng pole position safety jacket? how much mo nabili?

I dont know if this is the version 2. It was on sale at Motoworld MOA, originally priced at 4,500 got it for 2,500. This is old stock, so most probably, not version 2.

no problem yan sa soap and water. the textile part don't shrink naman.
just soak them in water with soap then use a fabric brush to brush your armor.
tapos hang it to drip dry. not under the sun or lul***** yung mga mga soft paddings and yung tahi.


HAHAHA ang higpit naman ng board of censors natin. bahala kayo, hulaan niyo nalang yung word na iyon HAHAHA
clue yung nawalang letters e tagalugin mo yung n-i-p-p-l-e HAHAHA