good day fellow riders, ask ko lang kung may nabibili bang solvent / solution na pwedeng makatanggal ng scratches ng helmet shield? If meron, saan? Medyo marami na kasing gasgas ang shield ko. Thanks in advance for the info.

problema ko rin yan. help!!!

mga bro...search this thread, there had been a previous discussion on this topic...para makuha nyo yung different suggestions.....ride safe

This is what I do with light scratches. Clean soft cloth and GLO metal polish. Rub metal polish to the lens using the soft cloth. But I don't recommend this on tinted lenses.
Deep lens scratches; Go to any plastic signage maker. They have a buffer for that. HTH

minor scratches, tama si sir gary....kuha pa ng buffing yan............but deep scratches due to bangga or fall.......no other way but replace it...:)

visit a car accessories shop or Ace Hardware.... daming SCRATCH REMOVER binibenta. me turtle wax, 3M, polyglaze....

rubbing or buffing compounds like GLO is also ok. pero kung malalim talaga, palit ka na ng lens :D

Yung sa buffing sa mga plastic fabricators my pang buff sila pero... ninipis na ang lens mo. Tried it once and used it for like 8 months kc nung may tumamang maliit na bato medyo nag crack na. Kung mas malakas yung talsik nung bato baka tumagos pa sa mukha ko. Palitan mo na lang. Tutal lapit na X-mas bonus! Yahoooooo!!!!

try nyo sir ung toothpaste. lagyan nyo ng konti lang tapos rub with soft cloth.

Di makakasira ang Glo sa helmet mismo? Masisira finish at protective material? :(

kaya nga daw sir nde po pwede sa may tint

Thanks to all your suggestions. If u all recal, yung swatch na relo, di ba may pinapahid sila don kapag may scratches yung watch mo then mawawala agad. Balak ko nga magtry din don kung pwede!

Ride safe

BrokenSword eto Proven na gumagana na talaga!

Try mo kumuha ng Rubbing Compound syempre para mawala yung scratches, then gumamit ka ng kahit anung wax na pangshine or kahit pledge, pero sakin gamit ko after mag Rubbing Compound is ARMOR ALL