Mga sir, tanong ko lang: Madali po ba mag alis/kabit ng pipe for underbones? i have a kymco axr110 kasi e and balak ko bumili ng pipe tapos sa bahay ko nalang ikabit.

di ko kasi dadalin yung mc ko when i buy kasi hirap ata may dala pang extra pipe habang nagrride. Technical ba sya na kailangan talaga ipakabit pa sa mga mekaniko or its just some screwing/unscrewing bolts and your done?

thanks po sa mga magrreply! ride safe! :)

check the forumes regarding pipe..there are a lot of pipes available..

I think there is a technical guide on hoe to install a pipe...

anyway..are you aware that there are several issues when you install a pipe..like city ordinances and the likes..just for your info..

ride on...

If your home located at the city or congested places loud pipes will always be the center of attention of your neighbors plus city ordinaces prohibiting loud pipes but if your excempt to those mentioned oh well good for you.

Dude replacing your stock pipe let say with open pipe available in the market whatever brand it is requires a little bit skills i think partly in rejetting A/F mixtures but not that much difficult there are techniques and essential ways by DIY try reading technical forum.

Second option aside from DIY "do it yourself" are those mechanics well known not those seranikos hehehe, they can provide you assistance with extra money involve of course installing the pipe and rejetting as well i think thats the best way if your reluctant or in doubt.

If you have backride i think that will be a good help once purchase new pipe.

HTH ;)

Mga sir, tanong ko lang: Madali po ba mag alis/kabit ng pipe for underbones? i have a kymco axr110 kasi e and balak ko bumili ng pipe tapos sa bahay ko nalang ikabit.

di ko kasi dadalin yung mc ko when i buy kasi hirap ata may dala pang extra pipe habang nagrride. Technical ba sya na kailangan talaga ipakabit pa sa mga mekaniko or its just some screwing/unscrewing bolts and your done?

thanks po sa mga magrreply! ride safe! :)


you mean, installing aftermarket EXHAUST PIPE?

if that's what you mean, just simply buying one & replacing your stock, well, i guess you can DIY... easy as one, two, three...

first thing that comes out must come in last...

take the bolts off that hold the exhaust pipe (or muffler as it is technically called), take off the bolts that hold the downpipe & the exhaust manifold (yung iron flange na me 2 bolt na nakakabet sa makina mo), then, that's it. tanggal na. salpak mo na lang yung bago :clap:

but here's something that you have to consider which i pressume you know already: be sure that the aftermarket pipe you're buying fits your bike (for a kymco AXR, pipes for XRM are perfect fit!) AND your locality does not ban loud pipes :D