I'm looking for some parts and most of the shops I have asked around doesn't carry G-Max accessories. MPI might not bring in aftermarket parts since they should promote OEM parts for their branded scooters. I'm not into radical modifications, just some needed parts that PGO failed to attend to. And a little customized look to differ my scooter from the rest of G-Max scooters.

Any ideas will be appreciated. Found a website that carries aftermarket parts, but it seems that my email was not read. No replies since a week ago.

http://www.psn-scooters.co.uk/htm/pgo1.htm

I'm looking for some parts and most of the shops I have asked around doesn't carry G-Max accessories. MPI might not bring in aftermarket parts since they should promote OEM parts for their branded scooters. I'm not into radical modifications, just some needed parts that PGO failed to attend to. And a little customized look to differ my scooter from the rest of G-Max scooters.

Any ideas will be appreciated. Found a website that carries aftermarket parts, but it seems that my email was not read. No replies since a week ago.

http://www.psn-scooters.co.uk/htm/pgo1.htm

this website looks familiar...:)[minsan dito ako umoorder ng accessories] ..i heard rumors na me local distributor ng gmax accessories satin....pati 200cc block and all the parts na nakita mo sa psn...just wait baka me mag re reply pa sa inquiry mo.

Any feedback on their items? Will they ship items via Fedex or DHL? It's been 10 days and counting... I have already forwarded the same message, hoping for their reply.

I guess not everyone from MCP is familiar with G-Max accessories... :(

Any feedback on their items? Will they ship items via Fedex or DHL? It's been 10 days and counting... I have already forwarded the same message, hoping for their reply.

I guess not everyone from MCP is familiar with G-Max accessories... :(


....pwede siguro..pero sigurado ako it is expensive.
....i'm based here in uk...kaya di problema bumili ng mga pyesa dito..yung mga nabibili ko i send it by balikbayan box. i could had bought these accessories through psn..kaya lang mas gusto kong bilhin yung 200cc...[kung sakali mang meron magbebenta..]

kaya di pwede yung mga engine n panggilid modz na binebenta ng psn coz pang 125/150cc lang yun[including the exhaust]

I'm looking for some parts and most of the shops I have asked around doesn't carry G-Max accessories. MPI might not bring in aftermarket parts since they should promote OEM parts for their branded scooters. I'm not into radical modifications, just some needed parts that PGO failed to attend to. And a little customized look to differ my scooter from the rest of G-Max scooters.

Any ideas will be appreciated. Found a website that carries aftermarket parts, but it seems that my email was not read. No replies since a week ago.

http://www.psn-scooters.co.uk/htm/pgo1.htm
I would suggest you drop by hyper-rpm located at biglang awa Caloocan. The owner is taiwanese he can give you or bring in aftermarket parts for your PGO. Also, He can set up your PGO scoot very honestman he will not recommend anything that will not work on your scoot. Kaya lang medyo expensive parts sa kanya pero sulit

jetzone::: True, most of their parts are for 125/150cc, exact displacement released here locally.

reekee98::: Sir, do you have hyper-rpm's exact address? I would want to ask them if they have the parts or import the needed parts. Nothing's better if I can actually see the product upclose.

I'm looking for some parts and most of the shops I have asked around doesn't carry G-Max accessories. MPI might not bring in aftermarket parts since they should promote OEM parts for their branded scooters. I'm not into radical modifications, just some needed parts that PGO failed to attend to. And a little customized look to differ my scooter from the rest of G-Max scooters.

Any ideas will be appreciated. Found a website that carries aftermarket parts, but it seems that my email was not read. No replies since a week ago.

http://www.psn-scooters.co.uk/htm/pgo1.htm



:s Good day bro, just read your thread, and i just remembered we talked a few days ago about the metal flooring for your Gmax and im looking forward meeting you this November when you happen to drop by here in Quezon City..........

Yes sir Ferdie, I will contact you once I step into Manila area. :)

jetzone::: True, most of their parts are for 125/150cc, exact displacement released here locally.

reekee98::: Sir, do you have hyper-rpm's exact address? I would want to ask them if they have the parts or import the needed parts. Nothing's better if I can actually see the product upclose.
Try calling them at 3646284 / 3636084

Thanks for their contact numbers.

I hope other members could also pour in other contact numbers or stores names.

Up natin...

So far so good, only Hyper-Rpm has some parts that's on my wishlist. I've asked around some shop in Caloocan to no avail. Kahit na chromed bar ends lang wala daw stocks... poor me. :eek:

I'm looking for some parts and most of the shops I have asked around doesn't carry G-Max accessories. MPI might not bring in aftermarket parts since they should promote OEM parts for their branded scooters. I'm not into radical modifications, just some needed parts that PGO failed to attend to. And a little customized look to differ my scooter from the rest of G-Max scooters.

Any ideas will be appreciated. Found a website that carries aftermarket parts, but it seems that my email was not read. No replies since a week ago.

http://www.psn-scooters.co.uk/htm/pgo1.htm

Hi Ungas,

May i have an idea what these parts are that PGO "failed to attend to?" Just curious since i also have a G-Max.

Thanks

They're just minor points but more on aesthetically mods. Some may even think that I'm a little "O-C" over things.
- rear fender fails to cover water/mud sprays when driving on puddles which cannot be avoided. Though there's an extra fender extender included, it doesn't match the scoot's overall aspect. [alternative option is to put a rear fender rack that's almost the same as Sym Jet's. Afaik, 4 vavled models have this as standard part.]
- beep horn too soft for cagers. [aftermarket horns]
- floor board oem rubber poor traction. Wet soles tend to slip. [alternative option, stainless metal floor boards with holes, better sole grip]
- soft rubber bar ends. [I still have yet to find an alloy or light steel to fit over it. An option is to try fitting bar ends from Raider]
- rear grab bar too low for pillion's grip. [additional spacers or aftermarket rear grab bars.]

Aftermarket accessories that I'm loking for:
- fork stabilizer
- rear led lamp set
- cnc engine hanger
- rear fender rack

Good to know they're part of aesthetic mods and not crucial to bike maintenance. Goes with the enjoyment of customizing one's ride.

When i get to know my bike better, perhaps i'll just be as OC.

Thanks for the comments.

Up natin...

So far so good, only Hyper-Rpm has some parts that's on my wishlist. I've asked around some shop in Caloocan to no avail. Kahit na chromed bar ends lang wala daw stocks... poor me. :eek:

re. sa bar ends sir. baka pwede naman pa-fabricate na lang? try na lang sa mga machine shop sa malapit sa location mo. just give them the design and the measurements, i'm sure kaya nila yan.

btw, san ba location mo sir? maybe i can fabricate one for you if you want.

pero mine is made of solid chromed steel. mabigat. the advantage some say is, it lessens/absorbs the vibration from the handle bars.

here's a sample. my joyride's bar ends.

john beri::: Likewise my Gmax is only a couple of months old, and I'm still looking out for any bad traits that may arise.


wasted_23::: That's the chromed bar ends I've been looking for! Pwede kayang plain alum na dull color? Kala ko kasi madaling mabili over the counter. Sampaloc area po ako near UST. I know some machine shops near our place, let's just say that their quality ain't that a-ok. Please do fabricate a pair for me! I don't mind if they are heavy or light. Atleast I could compare them which is better for our rides. The problem is I'm curently out of town working and I'll be back in Manila probably end of this month.

My contact numbers:
0917-5360552
0928-3280358
7327807 (toll free)

wasted_23::: That's the chromed bar ends I've been looking for! Pwede kayang plain alum na dull color? Kala ko kasi madaling mabili over the counter. Sampaloc area po ako near UST. I know some machine shops near our place, let's just say that their quality ain't that a-ok. Please do fabricate a pair for me! I don't mind if they are heavy or light. Atleast I could compare them which is better for our rides. The problem is I'm curently out of town working and I'll be back in Manila probably end of this month.

My contact numbers:
0917-5360552
0928-3280358
7327807 (toll free)

oke, if ever you're in manila na, text me na lang. 09163845747 - Ron

oist...ako din...pa gawa ng bar ends.....

Ungas,

Most of the parts your looking for are available in Hyper RPM. There is a Gmax owner his name is JOJO Marcelo he cold help you out in finding all the stuffs you want...Sa caloocan kasi nakatira yun...If you can attend the meeting this Saturday at Total Ortigas near Santolan around 6 or 7pm...you could meet the club memebers...dami rin sila bninebenta mga accessories...na sariling paratin or nabili somewhere.....

I have already texted Jojo, he also sourced his parts from the same store mentioned.

May inaabangan pa po kasi ako sa Gmax nyo, incase you decide to sell your fork stabi, hehehe. :D

oist...ako din...pa gawa ng bar ends.....

Ungas,

Most of the parts your looking for are available in Hyper RPM. There is a Gmax owner his name is JOJO Marcelo he cold help you out in finding all the stuffs you want...Sa caloocan kasi nakatira yun...If you can attend the meeting this Saturday at Total Ortigas near Santolan around 6 or 7pm...you could meet the club memebers...dami rin sila bninebenta mga accessories...na sariling paratin or nabili somewhere.....
Mike, Gusto mo deliver ko sa yo sa Dona Juliana pag ka gawa?:D

Reekee98,

Uy Yes!!! Please..hehehe...pero kay jie mo ibigay....baka ibato sakin nung ex-wife ko yun pag nakita me...hehehehe....

Reekee98,

Uy Yes!!! Please..hehehe...pero kay jie mo ibigay....baka ibato sakin nung ex-wife ko yun pag nakita me...hehehehe....

Sure no problem, buti na lang....kapitbahay lang sya ng mother ko eh buti na lang di ko ako nagtatanong...he he he....

Wasted gawa mo na raw si Big foot ako na magdadala

Hey Reekee.... naka g-max ka na? send mo naman pics ng gmax mo thinkin of getting one pang-daily commute.. para me partner yung v-max ko hehehe

Reekee,

Thanks a lot dude....PM me pag ready na and BTW, how much damage?....

Hey Reekee.... naka g-max ka na? send mo naman pics ng gmax mo thinkin of getting one pang-daily commute.. para me partner yung v-max ko hehehe
Di ah, di pa ako big time kagaya mo...si Bigfoot ang distributor ng GMAX dito meron din ako nakita showroom dyan sa Rosario parang warehouse o kaya punta ka sa MPI sa Mandaluyong para maka test drive ka...PM mo na lang si Big Foot

Reekee,

Thanks a lot dude....PM me pag ready na and BTW, how much damage?....
Ay si wasted ang mag price ako lang magdadala sa yo kasi punta naman ako sa ermat ko....by the way kailangan magkita sila ni ungas para masukat nya yung bar end na ilalagay

Nakakabit na pow yung bar ends. Pagbalik ko ulit ng Manila medyo papabawasan ko ng konti, napalaki yung design na pinagawa ko, hehehe. It was a pleasure doing business withe wasted_23 at the same time bumping into reekee98 in his shop.

On the other hand, may nakita akong Gmax accessories store along Remegio St. in Sta. Cruz. Nagpaparating din ng DCR products. Although meron din siyang ibang accessories for other models/brands like JR's, GTS's, GD's & Jets.