Hi guys. I'm pretty new to the forum and I'm planning to buy my first MC in the next 2 or 3 months (ipon pa ng pambili...hehehe). I've read a lot of reviews about the Z200 and also seen the bike in some of the dealer's showrooms. Although I like the reviews I like to check all available options. I've read the reviews on the c200 in this forum however there is no substitute for seeing the bike in person. Do you know of any dealers where I can check out the bike? I live in Q.C. so a dealer located nearby would be nice.

Thanks in advance peeps.

Hi drifter welcome to the forums.
In case you wont find a dealer in QC theres one in Taytay the name of the store is Streetbikes.
Happy bike hunting.:)

hi drifter, there's a dealer at SM City North Edsa Cyberzone between McDonald's and Mangan restaurant at Cyberzone.

thanks for the reply guys. luckily both locations are convenient to me. since i live in qc and work in cainta. i'll try to drop by one of these shops on my day off

@drifter;

If you are near E. Rodriguez Blvd. between Judge Jimenez and New York St.; there is a dealer there. Its almost opposite the Metrobank branch.

If on your way to Cainta from Quezon City you happen to pass by Marcos Hiway, you may want to pass by my place and see the Z200 & C200 side by side since you're interested in both bikes. My home is walking distance from Marcos Hiway. I'm selling either one of them to give space for another bike.

@drifter;

If you are near E. Rodriguez Blvd. between Judge Jimenez and New York St.; there is a dealer there. Its almost opposite the Metrobank branch.

If on your way to Cainta from Quezon City you happen to pass by Marcos Hiway, you may want to pass by my place and see the Z200 & C200 side by side since you're interested in both bikes. My home is walking distance from Marcos Hiway. I'm selling either one of them to give space for another bike.

@byker;

I am quite near E. Rodriguez. I'll try to check that location this afternoon. Since you happen to own both of these bikes, would you mind giving me a rundown on the pros and cons of each? Thanks

Btw, my main concern of course is avaialability of parts. I know that the durability of any machine relies greatly on the usage and maintenance of the owner but they will still breakdown at some point. Any, advice in making the right choice would be greatly appreciated.