Does any one have comments or impressions on the Jianshe City Prince? Would appreciate it, as I'm thinking of getting one.

Thanks in advance ;)

Is that the 50cc scooter being sold in Caloocan?

do you know that the new YAMAHA CRYPTONs are made by JIANSHE???

I'm not so sure but most probably not. The one I'm refering to is displayed in their EDSA showroom, it's a 125cc. :)

SKYGO Racing ,

Nope. There's no business going on between Yamaha and Jianshe. You may have probably seen Jianshe's imitation of Crypton; they call it "Jianshe Dash".

It's just like Jianshe's Dagger as duplicate for Suzuki Raider and Honda Sonic; Honda Wave 110 and Lifan Waave 110.


:D

Originally posted by Jay_Z
Does any one have comments or impressions on the Jianshe City Prince? Would appreciate it, as I'm thinking of getting one.

Thanks in advance ;)

bili ko na lang ng sinski bigboy difference lang ng mga php7t 150cc na poging pogi pa... tapos contact sir reekee he he


:* Sinski Boyz

ang balita ko, from friends and other forums posted here, in all the china made bikes jianshe motorcycle ang may pinaka maraming complain in quality, but that was 3 mos. ago,.... just an input, but the final decision will still be yours

wag na lang jianshe cityprince.. BASTA!!! (ewan ko lang ung ibang unit nila)

:* Sinski Riderz

una po sa lahat pasintabi po sa may mga bikes na china made..

wasted_23

:D hahaha, kung ako kc sayo pag-isipan mo ng mabuti, kc ako kumuha din me ng china made motorcycle zongshen 125-8 yun, kung sa ok, ok din yung performance nya but ang hindi natatangal sa isip ko yung doubt about sa unit kc sa totoo lang hindi sya talaga pang-matagalan, sa porma talagang swabe! and affordable ang price, kaya lang sa mga praktikal na tao kung papipiliin sila between china made & japan, they will go to japan made, why? kc reliable and durable, available pa yung mga parts, ung mga dealer kc ng mga bagong motor ngayon they keep on saying na "available ang parts nyan Honda din yan" pero sa totoo hindi nman talaga subo yung mga parts nya sa loob ng makina, kung magrereplace ka kelangan pa i grind, dagdagan o bawasan.. ganun po, kaya ngayon ang bike ko Honda na, matipid na wala pa akong doubt..

di ba masarap mag-ride kapag at ease ka?

ito'y payo po lamang.. di po ang layunin ay manira kundi makatulong ..

:) peace.. =b

oke oke, alam naman ng lahat na mas matatag ang mga japanese made.. kahit ako, kung kaya ng budget bakit hindi? pero bro, magkano ang skut ng honda na 150cc? ako, wala talaga akong idea.. pero i,m sure napakamahal nyan. bro, indi ako mayaman para mag invest sa ganyan.. ang akin e sinski bigboy 150 at masaya ako d2 dahil me mga nakasubok na at hanggang ngayon e d pa sila napapahiya.. ang pinaguusapan dito e ung cityprince ng jianshe, nagkaron ako nito at talagang ang pangit ng naging experience ko dito sa skut na to...bro, kung me local made nga lang na skut un ang bibilhin ko e he he
nga pala bro available talaga ang parts ng sinski.. sa kalookan


:C peace!!!


:* Sinski Riderz

kaw naman wasted_23, Ba't di mo pa kasi sinabi agad na nagkaroon ka ng Jianshe Prince kaso bad ang experience mo:D

Guys,

it's confirmed! Skygo is right. There's business between Jianshe and Yamaha. Pero same parts as before ang ginagamit, labor lang daw yata ang sa Jianshe and limited models lang ang gagawin nila.

But the dagger, Prince, etc are all OEM products of Jianshe, walang alam don ang yamaha.
Yamaha models will still bear the yamaha name/emblem, so you wouldn't know if it's originally made by Yamaha or by Jianshe.

Originally posted by reekee98
kaw naman wasted_23, Ba't di mo pa kasi sinabi agad na nagkaroon ka ng Jianshe Prince kaso bad ang experience mo:D

nag pm na ako b4 k jay_z about sa xperience ko, kaya lang.. kaya lang ang akala ata ni cool e ako ang bibili( ganun ba un he he) kaya nga sabi ko, wag na lang cityprince... pero....pero, pero at pero pa uli ehe he he

:)

:* Sinski Riderz

Originally posted by wasted_23
nag pm na ako b4 k jay_z about sa xperience ko, kaya lang.. kaya lang ang akala ata ni cool e ako ang bibili( ganun ba un he he) kaya nga sabi ko, wag na lang cityprince... pero....pero, pero at pero pa uli ehe he he

:)

:* Sinski Riderz

wasted_23

akala ko nga bibili ka pa lang.. :*
:crazy: hilo ako sayo, ahe he he!

peace :o

akala ko nga bibili ka pa lang.. :*
:crazy: hilo ako sayo, ahe he he!

peace :o [/B][/QUOTE]

nya ha ha... bro, k lang ung mahilo ka paminsan minsan.. at least d mo na ko malilimutan nyan..ehe he he... pero bro, me mga chinese brand na ok naman, kasi nasa gumagamit din un minsan.

:D peace :punk: :hug:

:* Sinski Boyz

your right wasted_23 my china made bike na predator ok parin performance, maski ang dami ng punishment na dinaanan, and this is the bike where I learned to ride a motorcycle at kahit anong ingat ko dahil sa lubak na terrain dito na may biglang malalalim at malalaking butas samahan mo pa ng matinding baha na umaabot sa exhaustpipe and engine plus highside and lowside na semplang it still performs well. ang tibay ng pagka construct...although its china made...but like I said also may china din na pangit ang quality...so the final decision is still doon sa purchaser ng bike...

Originally posted by bemps
your right wasted_23 my china made bike na predator ok parin performance, maski ang dami ng punishment na dinaanan, and this is the bike where I learned to ride a motorcycle at kahit anong ingat ko dahil sa lubak na terrain dito na may biglang malalalim at malalaking butas samahan mo pa ng matinding baha na umaabot sa exhaustpipe and engine plus highside and lowside na semplang it still performs well. ang tibay ng pagka construct...although its china made...but like I said also may china din na pangit ang quality...so the final decision is still doon sa purchaser ng bike...


bemps, i'll drink to that!! pano natin malalaman ang kakayahan ng isang bagay kung di natin susubukan? at kaya rin nga me MCP e para tumulong sa atin sa ibang mga bagay na wala pa tayong kaalaman... d b?.. remember... kahit na anong tibay ng isang bagay e hindi magtatagal kung aabusuhin at d aalagaan!



:* Sinski Boyz

Originally posted by wasted_23
bemps, i'll drink to that!! pano natin malalaman ang kakayahan ng isang bagay kung di natin susubukan? at kaya rin nga me MCP e para tumulong sa atin sa ibang mga bagay na wala pa tayong kaalaman... d b?.. remember... kahit na anong tibay ng isang bagay e hindi magtatagal kung aabusuhin at d aalagaan!

:* Sinski Boyz


I agree mga bro, ung akin nman eh payo laang base sa aking experience.. well nasa gumagamit talaga yung buhay ng bike..

enjoy sa pag ride mga bro! ingat lang kc maulan ngayon medyo madulas daanan.. k? :)

peace ;)

Guys, Come to think about it kung wala ang China brands ilan kaya sa atin ang makakabili ng scooters or motorcycles. Also did you notice na di nagtaas ang Taiwan or Japan made scooters and motorcycles because nagkaroon ng alternative ang consumer which is the Chinese brands:D

Meron din effect yung mga consumer na nag-pa-patronize ng China made scooters and motorcycles bumababa ang price ng taiwan/japan made or di na sila nagtataas:D

Sa SYM at Kymco, ganon pa rin ang presyo, bumaba yata pero barya lang ang ibinaba. Nung kalalabas ng Joyride 200, nag promo sila, 125,000 pesos ang benta, pero after sometime natapos ang promo, tumaas sa 130+K. Sa dagupan 136K ang benta nila.

Pero sa tingin ko kung walang china made na skut gaya ng sabi ni reekee, siguro until now hindi pa ako nakatikim ng skut life :D.... unless benta ko dalwang PC ko :D hehehehe.


Jay_Z, musta na dyan? Naka bili ka na ba ng skut mo? :)

Ok naman ako Wolver888, kya lang di pa rin ako nakabili ng scoot. I've put it on hold muna, most probably next year na.

Thank you din pala sa lahat ng mga payo nyo and I have to say that the "Bigboy" looks great! For sure, ito ang bibilin ko pag nakapgdecide na akong bumili ng scoot! :*

Ciao,
Jay Z. :D

Originally posted by Jay_Z
Ok naman ako Wolver888, kya lang di pa rin ako nakabili ng scoot. I've put it on hold muna, most probably next year na.

Thank you din pala sa lahat ng mga payo nyo and I have to say that the "Bigboy" looks great! For sure, ito ang bibilin ko pag nakapgdecide na akong bumili ng scoot! :*

Ciao,
Jay Z. :D
Great! Kapag nakabili ka ng Big Boy sabihin mo agad sa akin para maging member ka ng Sinski Riders Club. Also I can assist you in buying your scoot. Kapag medyo mahal sa main meron tayong options:D

Jay_Z next year pa? Matagal pa pla. Anyways, sige at hihintayin ka namin magkaroon ng ride then kita kita someday. :)

Yup, next year pa. I had to put on hold this dream but just for a while ;) Kya nga twing pupunta ako sa forums na ito mas naiinis at naiingit lang ako. Dibale, a few more months tapos sabay na ako sa inyo!!! :D

magakano ang skygo na parang raider sa CEBU?

okay ba ang jianshe na parang raider?

Ako I'm using a Loncin Cyclone 200cc. It's also a China-Made bike pero ok naman. There was a thread here about a rider who have the same bike who died because his Mags broke when he made a sudden front break while running very fast. Malabo ang naging resulta ng issue na yun kasi may nagsabi na nabanga naman pala sa kung saan yung rider kaya nabasag yung front mags and the rest of the front part nung Cyclone nya. Different unconfirmed stories.

Ako, my bike can run at 140kph. Saarraaap! Mags??? Matibay naman. I remember one time I'm running at the speed of more or less 80kph when I suddenly ran into this damn deep whole in the middle of C5 road. Di ko nakita kasi natakpan nung car na sinusundan ko. I'm very lucky because I was able control my bike that swayed left and right! I was very worried about my mags pero when I had it checked, walang damage kahit ano.

So that makes me believe that what happened to that other guy was not true. Most likely, nabanga nga sya.

God Bless his Soul...

Nasemplang na rin ako 3 times already, nagkaroon lang ng maliit na basag yung side ng bike ko. Aside from that, nothing else...

So to you Japanese-bike fanatics out there, wag nyo naman maliitin kaming naka-China made bike lang. Please... Because I the way I see it, China manufacturers are trying very hard to remove that bad image that their bikes are not durable enough. My bike's parts are available from the dealer where I bought it.

Bemps,

Musta na? di na natuloy yung plano nating group ride ah... magplano uli tayo. Busy ka pa rin ba?

Ako I'm using a Loncin Cyclone 200cc. It's also a China-Made bike pero ok naman.

Ako, my bike can run at 140kph. Saarraaap! Mags??? Matibay naman. I remember one time I'm running at the speed of more or less 80kph when I suddenly ran into this damn deep whole in the middle of C5 road. Di ko nakita kasi natakpan nung car na sinusundan ko. I'm very lucky because I was able control my bike that swayed left and right! I was very worried about my mags pero when I had it checked, walang damage kahit ano.


pre, what can you say about Loncin Cruiser 150 cc. oks ba 'yun? Inaapi kasi ako ng esmi ko kasi I'm planning to get one. ganda kasi ng porma at mura lang. 39 thou lang dito sa amin. Special promo daw kasi nila. Oks ba ang parts at maintenance? I have a dio 2 na gamit ko to get to work. Maihahataw ko rin kaya sa singitan ang loncin cruiser gaya ng paghataw sa singitan ng dio2 ko?

Same here Whitebear, cruising my china skut around 20-25kph, ran over a deep hole twice, one time alone and another with backride. I stopped and checked my alloy rims (front and rear) and thank goodness its not mis-aligned. :) But we gotta be more careful and watchfull next time. ;)

anyone out there can say something about Loncin Cruiser 150 cc. Gusto ko talaga bumili kaya lang thinking twice about parts and maintenance

anyone out there can say something about Loncin Cruiser 150 cc. Gusto ko talaga bumili kaya lang thinking twice about parts and maintenance

Ako rin...the loncin cruiser looks possibly best of the small cc chinese cruisers
I think.Any kind of info would be appreciated...or maybe this dude just buy a liffan 250(ganda to). :R ...and if they´re good enough to be sold in America ,the quality must be okey ba.

pre, what can you say about Loncin Cruiser 150 cc. oks ba 'yun? Inaapi kasi ako ng esmi ko kasi I'm planning to get one. ganda kasi ng porma at mura lang. 39 thou lang dito sa amin. Special promo daw kasi nila. Oks ba ang parts at maintenance? I have a dio 2 na gamit ko to get to work. Maihahataw ko rin kaya sa singitan ang loncin cruiser gaya ng paghataw sa singitan ng dio2 ko?
dude, a cruiser is almost 3 times bigger and heavier than a dio2 scooter... ikaw na mag judge kung pede ba sila i-compare pagdating sa singitan.:D

dude, a cruiser is almost 3 times bigger and heavier than a dio2 scooter... ikaw na mag judge kung pede ba sila i-compare pagdating sa singitan.:D
Sounds allmost like a challenge ...hummm :) unang lampa sa Daan ziiing ,you win ,pangalawa lampa,ikaw naman...third wap wap cruiser nanalo ako :O
biro lang.

medyo ot mga pre. im selling my jianshe cougar (ala sportbike) for 45k neg. help me naman guys need to upgrade..

thanks!

Sounds allmost like a challenge ...hummm :) unang lampa sa Daan ziiing ,you win ,pangalawa lampa,ikaw naman...third wap wap cruiser nanalo ako :O
biro lang.

Again, again, again?!? :D :D :D

Seriously, just think about Wasted's post man... :punk:

Again, again, again?!? :D :D :D

Seriously, just think about Wasted's post man... :punk:
nevermind bro...... baka magaling lang talaga sya mag maneho:D

medyo ot mga pre. im selling my jianshe cougar (ala sportbike) for 45k neg. help me naman guys need to upgrade..

thanks!

wats it luk lyk? la ka ba foto?

wats it luk lyk? la ka ba foto?

pre its on the classifieds sections. may pic dun. :)
anyways eto nag attach narin ako. :)

pre its on the classifieds sections. may pic dun. :)
anyways eto nag attach narin ako. :)
ilang cc ba yan bro???

:) Hmm ang sabi ko...Thinks a good scut or underbone is faster than a Harley Davidson............................................................(the first 3-4 seconds siguro)But a light scooter is great for commuting,ofcourse(good point man).

ilang cc ba yan bro???

150cc yan pre. call or text me at 09198239205/2953904 look for dennis

Guys, do you really believe that a bike with a Japanese brand name has 100% Japan-made parts?

No longer, Yamaha and Honda source their parts from China to cut costs and even have manufacturing and assembly agreements with Chinese motorcycle manufacturers like Jianshe and Lifan.

Does any one have comments or impressions on the Jianshe City Prince? Would appreciate it, as I'm thinking of getting one.

Thanks in advance ;)

naku bro kung sa performance ok din naman kaso one of the problem ive encounter is that napakadaling maubos ng langis sa makina for all we knew that it is a 4 stroke bike pero u will realized later na ala na pala langis ng makina mo. iyan ang problema nung sa akin at nung iba pang mga tropa dito. Pag nabyahe kami eh kailangan ko pang magdala ng langis ng makina pero kung sa bilis ok din naman.
:argue: :vomit:

kung balak u bumili i suggest honda nalang ala ka pang pagsisisi ang im sure u will satisfy with the performance parang babae din yan eh merong mura pero ala namang kalidad mas mabuti pa ung mahal talaga namang swabe :banana: :cheers:

Guys, do you really believe that a bike with a Japanese brand name has 100% Japan-made parts?

No longer, Yamaha and Honda source their parts from China to cut costs and even have manufacturing and assembly agreements with Chinese motorcycle manufacturers like Jianshe and Lifan.
Yes they do but according to quality and specs prescribed by Honda and Yamaha. But the Chinese scooters/bikes shipped here in the Philippines seems doesn't fall under the same quality being released in the European Market

Yes they do but according to quality and specs prescribed by Honda and Yamaha. But the Chinese scooters/bikes shipped here in the Philippines seems doesn't fall under the same quality being released in the European Market

Exactly. Almost every manufacture of complex equipment does the same. Take a look inside any computer and you will see chips and parts made in half a dozen countries.

The Honda Valkyrie clubs in the US are proud of the fact that in terms of percentage of parts made in America, the Valkyrie is more American than a Harley. I think Harley buy carbs from Taiwan, electrics for somewhere else, etc

My personal opinion is that Apple Computers are the best quality in the world but even most of them are assembled in China. The important thing is the materials, the standards and the quality control.

Sorry about the double post but I just remembered something relevant and worth keeping in mind.

I am convinced that a lot of products sold in the Philippines are rejects that are just dumped here either because the buyers (distributors) don't know or care, or because the buyers are buying rejects very cheap to make huge profits.

I notice it with things like light bulbs for the house. We always need a few in the cupboard in the Philippines because almost every week or two one needs replacing. In Hong Kong and in the UK they last for years! We never think about keeping some ready for when one goes dud.

I see products in the supermarkets with the expiry date removed and wonder if these were brought in from overseas after they were thrown out by a supermarket because they had expired.

I heard a story (second hand and not confirmed) that Sharp, who manufacture TVs etc in the Philippines, dump all the rejects on the local market.

It is certainly very possible that something similar could happen with imported bikes.

Boss Reekee!

I have a pm for you.

Yung Sinski Bigboy a good buy? Help naman, i think i like to get one. Thanks!

jianshe city prince is the biggest scooter type being sold by jianshe, the newest is a 200cc displacement unit. may katulad siya sa sinski at a much lower price, and sinski has a better stock of parts than jianshe. i own a jianshe myself, a monark 125 cc. ok naman gamit ko, but when it comes to parts and upgrades, mas mahirap mag order kasi galing lahat sa planta nila sa laguna ang parts nila so matagal ang intayan, unlike sinski mas mura ang parts and readily available. most of my upgrade parts for my jianshe monark i bought at sinski kaloocan hehehe

joahnn

I'm planning to buy china made motorcycle (cruiser) yon lang kaya ng budget ko e. should I go for Lifan or Jianshe? may service center ba ang Lifan sa Pangasinan? how bout Jianshe?

Thanks!

yung shop ko may katabing motorcycle distributor..yung mga sinski nila na motorcycles..napansin ko...madalas mapundi ang ilaw.. whether for cruiser. tricycle style.. pero yung scuts nila ok nmn.. yung electric starter din problema sa mga bikes ng sinski..