Hello to MCP & all the bikers (& non-bikers alike);

I'm new here in the MCP & wondering where my fellow c200 owners are? This site has lots of things going on for many groups with common types of bikes but i cant find the group of c200's. Can anyone help me find them?

If there is no such group yet, i know of a place where fellow c200's owners may meet. The place offers FREE playing time on their pool table, NO CORKAGE for DRINKS & FOOD that'll be brought in, & it's located near Katipunan Ave, in Quezon City. Practically the site is somewhere between the east, west, north, & south of metro manila making it easier for us c200 owners to meet. So if you're a c200 owner, follow this thread & maybe we could set up a schedule to meet at said place (again for FREE) & maybe we could start something. We could share ideas re our bikes & probably start our own FUN OUT-OF-TOWN RUNS. I haven't run my bike out of the Metro.

That'll be for now. Hope to here from you guys out there. Safe ride! :)

byker,
newbie also likes to come... could you give details of the exact location? ako malapit lang dyan, along marcos hiway.

also give me ur scheds and time when you are going to be there thanks! :s

I'm almost always there after office hours, its my hang-out. Kaya libre na tayo to play billiard there. Puede tayo magdala ng food & drinks.Its also private. Its located in Industrial Valley subdivision, its between riverbanks, katipunan, & eastwood city. i,l pm you guys the details. mahirap ng i-broadcast baka mapuno yung lugar. Joke.

I'm normally free on sundays except this coming 21st. just inform me through here or better yet, txt me at 09167000954.

God bless & safe riding :R

I'm almost always there after office hours, its my hang-out. Kaya libre na tayo to play billiard there. Puede tayo magdala ng food & drinks.Its also private. Its located in Industrial Valley subdivision, its between riverbanks, katipunan, & eastwood city. i,l pm you guys the details. mahirap ng i-broadcast baka mapuno yung lugar. Joke.

I'm normally free on sundays except this coming 21st. just inform me through here or better yet, txt me at 09167000954.

God bless & safe riding :R

hokie,
will do...

fellow loncin owners,

malapit lang din ako sa katipunan. my place is near camp aguinaldo. I hope to meet you guys when schedule permits. :)

fellow loncin owners,

malapit lang din ako sa katipunan. my place is near camp aguinaldo. I hope to meet you guys when schedule permits. :)

practically kapitbahay lang tayo trendy. if you like playing billiards as well, sagot ko. punta lang kayo dito nila erictf, newbie-r, angeljed, & all the loncin guys. :R

Hi Byker,

Imagepro here. I also live within the area of katipunan, along Loyola Heights. I would love to meet with other bikers using the C200. I bought my C200 last year but was not able to use it extensively because I've been very busy.

Pls. PM me the location in Industrial Valley Subdivision.

Thanks!

Hi Byker,

Imagepro here. I also live within the area of katipunan, along Loyola Heights. I would love to meet with other bikers using the C200. I bought my C200 last year but was not able to use it extensively because I've been very busy.

Pls. PM me the location in Industrial Valley Subdivision.

Thanks!

Hello imagepro;

you & your bike are most welcome to join our group. I've PM you the IVS address. hope we can EB on sundays & have some out-of-town Fun Runs with other Loncin owners.

Hi guys.

Ano ba itsura nitong c200?
Meron bang counterpart ang LONCIN sa Motorstar z200?

Thanks guys :D

Iba ba yun Loncin Cyclone 200 sa Loncin Cyclone Cruiser? ??

Pardon for the ignorance guys :)

BTW, san nyo binibili yun mga Cyclone 200 nyo (yun kamukha ng z200?)

Thanks guys.

baka lifan cyclone, yung loncn cyclone200 ehh full flaired na mc its more of dual sportbike kasi matangkad sya, sa sm north carpark bandang dulo may display sila dati ehh..

ahhhh...

:)

Thanks.

Iba ba yun Loncin Cyclone 200 sa Loncin Cyclone Cruiser? ??

Pardon for the ignorance guys :)

BTW, san nyo binibili yun mga Cyclone 200 nyo (yun kamukha ng z200?)

Thanks guys.
hello wonderloo;

I just answered your queries regarding c200 on the thread titled "similar bikes of Loncin to that of Z200". please read it & you might get some helpful infos.

the main dealer of Loncin where you'll find a c200 i supposed is in mandaluyong city. opposite JRC along shaww blvd., you enter this road & you'll find it somewhere there. last april, the price of it was Php63T.

happy bike hunting! if you'll opt for a C200, welcome in advance to our community. :)

ask ko lang mga cyclone 200 user, kasi bago lang ako sa ganitong trend ng motor balak namin kasing bumili ng friend ko ng cyclone 200. tanong ko lang sa mga expert o mga owner na ng cyclone 200 kung ok ba ang performance and matitibay ba ung mga parts, and hindi ba mahirap maghanap ng parts dito, para naman di masayang ung pera ko... thanks mga pre for your advice...

ask ko lang mga cyclone 200 user, kasi bago lang ako sa ganitong trend ng motor balak namin kasing bumili ng friend ko ng cyclone 200. tanong ko lang sa mga expert o mga owner na ng cyclone 200 kung ok ba ang performance and matitibay ba ung mga parts, and hindi ba mahirap maghanap ng parts dito, para naman di masayang ung pera ko... thanks mga pre for your advice...

hello bro,

personal opinion lang po, i think china made bikes' performance & durability as compared to the Big 4 jap models is still in the infancy stage. the exterior designs are great & they copied the engine components. but the sturdiness of its components & perfection of its fittings are still for improvement. bottom line however, irregardless of the make of the bike, the lenght of the service a bike will give its owner is proportionate to the care & maintenance an owner will invest on his bike. value for for money, china bikes are above in its class.

if you opt for a cyclone 200, welcome to the club. :*

Out of stock daw Cyclone everywhere...this true?

yung Granstar here at sm southmall, wala raw mahanapan.

pag mag karoon na sila, kukunin ko na :D

at sama ako sa mga runs nyo ah :)

Out of stock daw Cyclone everywhere...this true?

yung Granstar here at sm southmall, wala raw mahanapan.

pag mag karoon na sila, kukunin ko na :D

at sama ako sa mga runs nyo ah :)


Wonderloo,

So you've finally made up your mind, that's nice, whatever bike you got either it;s a LONCIN or Z200 all of you guys could still hang out with us.
Good Luck again Ms. Loo. :punk: :punk: :punk:

Galing ah! Nakuha mo yun nickname ko :D

Tagal nga eh. Iinip na ako. Kung ano na lang mauna, yung na lang bilin :D

Hope to hang out with you guys.

Naisip ko nga rin yung Honda CBR125. Meron ba nun dito? Parang wala eh!

Pardon guys kung ang dami kong mine-mention na brand ng motorbikes. Fan kasi ako talaga ng mga big bikes (sports-touring) :)

Galing ah! Nakuha mo yun nickname ko :D

Tagal nga eh. Iinip na ako. Kung ano na lang mauna, yung na lang bilin :D

Hope to hang out with you guys.

Naisip ko nga rin yung Honda CBR125. Meron ba nun dito? Parang wala eh!

Pardon guys kung ang dami kong mine-mention na brand ng motorbikes. Fan kasi ako talaga ng mga big bikes (sports-touring) :)

CBR150 Ms. Loo. Nice bike. But a bit pricey for me, 135k to 150k is the going rate for this bike.

Happy hunting and I wish you find a bike that would suit your preferences :bouncy:

oo nga. naisip ko rin yun :D
baka ma-buwal lang or whatever sayang...

z200 muna or cyclone :)

good luck wonderloo. try mo sa bikewise sa caloocan 3232835 (look for eric), bka meron pang c200, dto ko nabili yung unit ko. meron din bikewise sa tutuban.

sa tapat nila, andun naman yung z200.

guys, nga pala, i broke my choke cable, nasobrahan ata ng hila. may nakapagpalit na ba sa inyo nito? pareho din ba ito sa xlr200? (i have doubts na hindi kasi sa carburator na ito nakakabit at hindi na engine.
yung clutch cable kasi pareho.

Thanks guys. Nakakuha na ako ng bike :D

Wala bang club dito kayo? :D

question lang sa mga c200 owners...

Madali ba 100KPH sa bike nyo?
I can't seem to go past 80kph. Tried sa macapagal and sa daang hari. I have the same engine pero sa cruiser version. I hope its not a rider problem. :o

3rd gear@6000rpm = 60kph
4th gear@6000rpm = 80kph
5th gear@6000rpm = 80kph

I tried all the way up to mga 7-8000rpm before shifting
80kph pa din sabi ng speedo ko... :?

based on your experiences with this engine.. What do you think
- speedo may problema
- engine may problema
- rider may problema

:s

Waahhh! Kwento lang ako...

huhuhuhu...

Tuesday the 13th accident for me...

Hi guys...

I have bad news...a bad experience.

I was with my friend George, a notable expert rider of any big bikes... (buti na lang),

we were going to Lopez Sucat Parañaque, hayyy...hanging kasi, tapos may gutter,

tapos may kahoy, tapos may pothole na may tubig...nalusutan kasi ni George, so I

thought kaya ko rin with my new bike...

Sige! Pasok...I was on 1st Gear, paakyat...heavy traffic by the way, umakyat ako,

naku! nagtuluy-tuloy sa gutter paakyat! I hit a meralco cement post (sumalpok!) I got

unconscious for about 2 seconds there. I hit the post, then out of control, out of

balance, I hit the car (naka-stop) sa left ko...parang nag-bounce ako...tapos tuluy-tuloy

ako sa harapan nya...

On thing I remember, nakahiga na ako sa hood ng car nya...with my dropped bike na

rin. I called George, medyo nagpanic at na-shock ata sya...people carried me and

George lifted the bike.

Hayyy...

results:
a dented ford lynx
a dented frong fairings
a cracked side fairings
heavy scratches on the fairings

and (me, the rider)
7 pasa (bruises), 3 scratches, a minor broken middle finger and a bad twisted wrist...

pero, ok lang naman ako...lesson learned. an expensive one.

Please ride safely guys...

hayyy...newbie talaga.
guys, sama nyo pa rin ako sa mga fun ride nyo ah...
I'll learn naman in the process.

Waahhh! Kwento lang ako...

huhuhuhu...

Tuesday the 13th accident for me...

Hi guys...

I have bad news...a bad experience.

I was with my friend George, a notable expert rider of any big bikes... (buti na lang),

we were going to Lopez Sucat Parañaque, hayyy...hanging kasi, tapos may gutter,

tapos may kahoy, tapos may pothole na may tubig...nalusutan kasi ni George, so I

thought kaya ko rin with my new bike...

Sige! Pasok...I was on 1st Gear, paakyat...heavy traffic by the way, umakyat ako,

naku! nagtuluy-tuloy sa gutter paakyat! I hit a meralco cement post (sumalpok!) I got

unconscious for about 2 seconds there. I hit the post, then out of control, out of

balance, I hit the car (naka-stop) sa left ko...parang nag-bounce ako...tapos tuluy-tuloy

ako sa harapan nya...

On thing I remember, nakahiga na ako sa hood ng car nya...with my dropped bike na

rin. I called George, medyo nagpanic at na-shock ata sya...people carried me and

George lifted the bike.

Hayyy...

results:
a dented ford lynx
a dented frong fairings
a cracked side fairings
heavy scratches on the fairings

and (me, the rider)
7 pasa (bruises), 3 scratches, a minor broken middle finger and a bad twisted wrist...

pero, ok lang naman ako...lesson learned. an expensive one.

Please ride safely guys...

hayyy...newbie talaga.
guys, sama nyo pa rin ako sa mga fun ride nyo ah...
I'll learn naman in the process.


Hello po...
Hope gumaling po kayo agad at maka recover sooner...
Ako din po ay baguhan gaya ninyo sa pagdrive ng motor...
Kung hesitant po ako sa pagdaan or baka di ko kayanin ang daan, di po ako tumutuloy at nag full stop po ako sabay tukod ng mga paa then deretso na ulit... Mabagal din po ako magpatakbo at pirmi ang hawak ko po sa preno just in case of emergencies lalo na kung madaming sasakyan po...
Goodluck po sa inyo and get well soon...

--

@wonderloo

i'm sorry to hear about your accident...but it's very good to hear that you're fine & the accident has not cost you to loose interest in biking. that's the right attitude! you just have to be more careful in your driving. motosiklo is right in saying that 1 should be wary if 1 is tentative of the driving conditions. kapag may kaba, follow your guts & slow down or stop.

when you're with some other bikers, 'wag maghabol sa kanila. they won't leave you behind anyway. pabayaan mo silang mag-antay & follow your pace.


@4theride

100kph? that's very achievable with our bikes' engine. everytime i climb katipunan from Maj. dizon, i hit 100kph as i merge with the northbound traffis before reaching aurora-katipunan flyover (that's just near the corner of maj. dizon). but i plateau at that speed because i need to slow down before reaching the U-turn slot opposite Ateneo's gate 2.

i think bro the problem lies in the speedometer. i think it's not that accurate. my speedometer kasi sometimes fluctuates even if my acceleration is constant. that's weird & should not be the case. in normal acceleration, the speedometer reading should slowly be climbing since the acceleration of the vehicle is constantly increasing. a fluctuation in the speedometer suggest that your speed is increasing & decreasing at the same time. your bike is under warranty, so may i suggest you have it check by the dealer.

driver problem? nah, coz you mentioned your trying to hit 100kph. you have to be squeezing your engine to reach 8000rpm.

engine problem? nah, coz you didn't mention your engine to be faltering/fallado. even if the engine is stuttering, you can still reach 100kph so long as you can squeeze high rpm from your engine, yun nga lang pupugak-pugak ang takbo mo.

@Wonderloo
Wow!
Na visualize ko lahat ng sinabi mo. Parang slow-mo pa sa isip ko habang nag kwento ka. Takot ako sa banketa/gutter, ngayon lalo na. :eek:
Drive safe Please.

@Byker
Thanks for the feedback. Feeling ko mga 90-110 takbo ko nun time na yun kasi ang taas RPM tapos nginig na talaga bike and wala na akong katabi bike or cage, but the speedo still says 80!

Speaking of accidents kwento ko lang what happened this AM in front of my office. Race bike going his merry way (a bit fast) passes a 4 way intersection. Green light sya, walang ibang cage.

unknown to him...meron palang humahataw from the opposite side, counterflowing (may divider na island take note) na Revo. Head-on. Bike goes down while revo flees the scene (nakuha plate ng guards namin and reported it na to pulis) bike is totalled and biker broke left arm in several places - possible back injury pa, he looked bad.

Don't know what happened to him after sinakay sya sa vehicle to go to hospital - i just saw the aftermath and interviewed the guards. Revo driver this one is for you :g

Thanks guys!

Yup, ride safe kayo...wag gagaya sa akin :D

Yan, baptized biker na ako :D

4 the ride...nung break in yung bike ko, parang sgad na yung 100, nanginginig..lalo na sa 80-100. pero nung na brake in na, wala nang ngnig past 100...up to 120-130kph cguro natakbo ko sa tagaytay. not sure though how accurate the speedo is.

may rattle problem din yung RPM ko before due to vibration pero eventually, nawala nung di na masyado nagvibrate after breakin. granstar actually had it for replacement, kaso di na ako nakabalik kaya di na pinalitan.

about the accident, bka pwede sir ipost sa isang thread yung plate number nung revo. mcp user kaya yung rider?

wonderloo...ingat. its all part of the learning process. pero try to learn at your own pace. when in doubt or kabado. stop until confident ka na. good to hear your ok! :)

Mga bro musta? bago ako d2 and im currrently negotiating for a loncin cyclone 200...nakuha ko un ng 27k lang kc tropa ng frend ko ung may ari..tanung ko lang kung sirain ba cya or ndi naman ganun ka critical ang maintainance...? this will be my first bike..thnx and more power!!!:wave: :O

Mga bro musta? bago ako d2 and im currrently negotiating for a loncin cyclone 200...nakuha ko un ng 27k lang kc tropa ng frend ko ung may ari..tanung ko lang kung sirain ba cya or ndi naman ganun ka critical ang maintainance...? this will be my first bike..thnx and more power!!!:wave: :O

sir this newbie_rider, also loncin cyclone 200 owner. sa maintence change oil every 1000 km, linis lang ng spark plug and minsan kuting ting ng carbs pag medyo nararamdaman ko na kailangan na ng linis. so far wala namang naging major problem ung c200 ko.

sir gudluck sa first bike mo and sir invest ka sa safety gears

pre thnx ha...first bike ko talaga to as in first...may nag aalok sa akin ng mga automatik na 110 cc kaso nag alangan ako kc halos pareho lang din naman ung price ng alok sa akin so may kinuha ko ung cyclone 200 cc,sa riding naman marunong na ako nung mga automatik na motor like wave honda...dun sa cyclone marunung n din ako kaso mas experienced ako sa automatik...ok lang pala pag my klutch eh parang kotse din ang shifting..at ang lakas ng dating ng cyclone diba pre...anung model ng cyclone mo? ung kukunin ko is 2003 ok n kaya un..thnk u pre!!!:wave:

pre thnx ha...first bike ko talaga to as in first...may nag aalok sa akin ng mga automatik na 110 cc kaso nag alangan ako kc halos pareho lang din naman ung price ng alok sa akin so may kinuha ko ung cyclone 200 cc,sa riding naman marunong na ako nung mga automatik na motor like wave honda...dun sa cyclone marunung n din ako kaso mas experienced ako sa automatik...ok lang pala pag my klutch eh parang kotse din ang shifting..at ang lakas ng dating ng cyclone diba pre...anung model ng cyclone mo? ung kukunin ko is 2003 ok n kaya un..thnk u pre!!!:wave:

ung sa akin bro 3rd generation na cyclone ung magkahiwalay ung upan, got it septemebr 2004, more than a year na din. bro location mo? try to visit ung dragon riders thread may mga cyclone owners din doon tulad ni byker and erictf. don't worry mababait ung tao dun welcome na welcome ka

ah ok..parang ganun din ung bibilhin ko..sana dis week makumpleto n nila ung papers para makuha ko na..taga paranaque ka pala,ako bro taga las pinas lang ako..halos magkatabi lang

ah ok..parang ganun din ung bibilhin ko..sana dis week makumpleto n nila ung papers para makuha ko na..taga paranaque ka pala,ako bro taga las pinas lang ako..halos magkatabi lang

ayos, uy mukhang dumadami mga loncin owners na taga south ah

sa review ko sa internet highly competetive naman ang specs ng loncin..agree...!!! wala tayong paki alam kung china o phil. pa ang manufacturer as long as maganda ang specs...pre daming tao dun sa dragon riders...ok lang laya un..? cno b moderator dun..? salamat ha...

sa review ko sa internet highly competetive naman ang specs ng loncin..agree...!!! wala tayong paki alam kung china o phil. pa ang manufacturer as long as maganda ang specs...pre daming tao dun sa dragon riders...ok lang laya un..? cno b moderator dun..? salamat ha...

bro karamihan sa dragon riders mga loncin owners din, d2 nagkakilakilala ung mga members sa loncin thread. mababait mga dragooneers bro welcome ka dun, feel free magpost dun.

ariz muzta na bro, dropby ka naman minsan d2 sa proj.4, may mga sked na rides ba? available paba ung engine spracket na pahihiram mo sakin?

ariz muzta na bro, dropby ka naman minsan d2 sa proj.4, may mga sked na rides ba? available paba ung engine spracket na pahihiram mo sakin?

Hello victory;

Last toy run, I met a group of riders & one of them is jay who also rides a C200. Are you jay or among his group. Ariz mentioned me he met jay's group when he had his seats modified in Proj. 4.

Regards to everyone in your group. Your group will be a welcome addition to any of our group's activities.:*

I finally went past 12k on the odometer. Finally the the engine vibration is gone, i've finished the break in period (i think). The c200 can now easily reach the 100kph mark without the usual vibration and still I can reach 120kph at 7000rpm without hesitation.

I still use the original setup of the bike, mufflers, sprockets, tires, regular NGK spark plug and premium gasoline. I kick start in the morning and the engine starts without the aid of the throttle.

Still the same mileage at 35-40 kilos per liter. At a year old the c200 still smells like new and the paint job that they did on the body work is still shiny, considering I always park under the sun and under rains every day.

Hi guys,

I'm also a proud owner of Loncin200. kaya lang taga Pampanga pa ako.
Anyway here are the mods I did to my bike: modified mufflers, re-jet, replaced air filter, re-painted to lime green and replicated decals of ninja, my brother gave a me a pair of authentic ninja side mirrors. I removed the main stand ksi sumasayad when I get really low on a curve.

I always ride with a helmet.

Safe riding mga tsong.

Hi guys,

I'm also a proud owner of Loncin200. kaya lang taga Pampanga pa ako.
Anyway here are the mods I did to my bike: modified mufflers, re-jet, replaced air filter, re-painted to lime green and replicated decals of ninja, my brother gave a me a pair of authentic ninja side mirrors. I removed the main stand ksi sumasayad when I get really low on a curve.

I always ride with a helmet.

Safe riding mga tsong.
just want to ask what is re-jet? and what kind of air filter you replace? i have a cyclone200 3rd gen. ty and ride safely...........

Hi guys,

I'm also a proud owner of Loncin200. kaya lang taga Pampanga pa ako.
Anyway here are the mods I did to my bike: modified mufflers, re-jet, replaced air filter, re-painted to lime green and replicated decals of ninja, my brother gave a me a pair of authentic ninja side mirrors. I removed the main stand ksi sumasayad when I get really low on a curve.

I always ride with a helmet.

Safe riding mga tsong.
@hyperM;
Nice concept of using Ninja. If the bike on the avatar is your bike, job well done bro. What did you do with the rear seats: paint job, re-upholster, or seat cowl?

@victory;
How's nasbikes, you, and your bike?

@byker;
ok lang ako, about the group wala ako gaano balita kc medyo bz eh, papunta kc kmi Dubai ng misis ko mga 1 year kmi doon, pero bike ko standby lang muna dito sa bhay para pagblik ko ride uli, tentative date ng alis namin is Feb. 15, bk maykakilala ka na gustong punta Dubai may promo sa visit visa P18,200. just contact me 0927-3960816 or 9130315 Victor. Anyway how's the Dragon Riders Club? how's the jersy? nabanggit ko nga kay prez ariz na kukuha ako ng uniform kaso medyo bz kasi ako, pagkumuha kya ako magawa kaya before Feb.15?

@byker;
ok lang ako, about the group wala ako gaano balita kc medyo bz eh, papunta kc kmi Dubai ng misis ko mga 1 year kmi doon, pero bike ko standby lang muna dito sa bhay para pagblik ko ride uli, tentative date ng alis namin is Feb. 15, bk maykakilala ka na gustong punta Dubai may promo sa visit visa P18,200. just contact me 0927-3960816 or 9130315 Victor. Anyway how's the Dragon Riders Club? how's the jersy? nabanggit ko nga kay prez ariz na kukuha ako ng uniform kaso medyo bz kasi ako, pagkumuha kya ako magawa kaya before Feb.15?

@victory;
God bless you & your wife's Dubai plans. I'm sure the nasbikes will be missing one good friend. Maybe you can join the dragons run on February 12 to Tagaytay. One last ride before you fly. (",)
Regarding jersey's completion, I think the best persons to ask are adventurer and 4theride. They are the ones involved in the ordering. I really don't know when the completion is going to be but hopefully on or before our Feb. 12 run.

Hi guys,

I'm also a proud owner of Loncin200. kaya lang taga Pampanga pa ako.
Anyway here are the mods I did to my bike: modified mufflers, re-jet, replaced air filter, re-painted to lime green and replicated decals of ninja, my brother gave a me a pair of authentic ninja side mirrors. I removed the main stand ksi sumasayad when I get really low on a curve.

I always ride with a helmet.

Safe riding mga tsong.

hypermammoth,
Dragons is scheduled to visit Pampanga on May 2006, since I'm also from Pampanga and Fiesta sa amin sa Mabalacat... you can join us if you want.... pwede ka namin daanan before kami pumunta sa amin..

@ Victory: re-jet is the replacement of jet needle in the carb assembly to get back the right air/fuel mixture. But you only need to do that kung di mo na makuha ang adjustment dun sa air/fuel mixture screw. Pag hindi ksi tama ang air/fuel mixture, backfire ang resulta. Actually I just used a thinner filter, 1 ply of foam will do (para mas maraming hangin ang mahigop ng carb.) I'm planning to re-modify my mufflers again to get a "woof" sound just like a big bike. Next would be to lift the back a li'l bit.

@byker: yup that's my baby, 40 days in the making. Paint lang dun sa back seat. Dapat upholstery sana kaya lang di ako makahanap ng tamang kulay at that time.

@jdfvroooom1: Thanks for the Info sir, I'll make myself available on that month Kabalen.

@ Victory: re-jet is the replacement of jet needle in the carb assembly to get back the right air/fuel mixture. But you only need to do that kung di mo na makuha ang adjustment dun sa air/fuel mixture screw. Pag hindi ksi tama ang air/fuel mixture, backfire ang resulta. Actually I just used a thinner filter, 1 ply of foam will do (para mas maraming hangin ang mahigop ng carb.) I'm planning to re-modify my mufflers again to get a "woof" sound just like a big bike. Next would be to lift the back a li'l bit.

@byker: yup that's my baby, 40 days in the making. Paint lang dun sa back seat. Dapat upholstery sana kaya lang di ako makahanap ng tamang kulay at that time.

@jdfvroooom1: Thanks for the Info sir, I'll make myself available on that month Kabalen.thanks bro for the info:s ,Ride safe:clap:

i was driving to home last night and saw a double deck truck and its motorcycle cargo. It was big bike, then i came closer to take a glimpse of it, i guess they are new Cyclone 200. It looks bigger than the current ones and maybe a 250cc displacement

Hi guys,

I'm also a proud owner of Loncin200. kaya lang taga Pampanga pa ako.
Anyway here are the mods I did to my bike: modified mufflers, re-jet, replaced air filter, re-painted to lime green and replicated decals of ninja, my brother gave a me a pair of authentic ninja side mirrors. I removed the main stand ksi sumasayad when I get really low on a curve.

I always ride with a helmet.

Safe riding mga tsong.
Ganda ng Cyclone mo Sir! :)