This thread is for the members of club or user who want to upgrade modify his engine to touring mode ! Which means reliable and stable engine setup for daily or touring use

good pm sir. i have an '09 super 8 that's still all stock. i use it for daily commute and weekend touring with scoots 150cc up. i prefer a silent (sleeper) setup since i work at night and don't want to disturb my neighbors. what do you suggest for this kind of setup thats powerful but silent?

Sir regg ur needs ! U may keep ur setting in stack pipe so its will go silent !
And d engine upgrade ! Ff are suggested to apply

*mtrt 58.5mm chrome bore >>> higher rpm less friction lower working temperature

*mtrt touring cam >>> match with 58.5 up 61max bore displacement to bring out the power of 155cc mode and release the peak power locked by the stack camshaft bcz the stack camshaft is design for 125cc mode only and lower rpm setting ^_^

*mtrt racing manifold >>> the velocity turbine design to let the air / fuel mixture get more eficient its will save more gas on the daily use bike ! When its upgraded to 155 cc (58.5)

now the power is upgrade almost 3.5 horse power and the next you may need the transmision ! Its dealing with responce but only limited hp/toque changes !

*mtrt racing pulley
*mtrt alloy clutch bell
*mtrt center spring
*mtrt clutch spring
*mtrt torque drive

Sir regg ur needs ! U may keep ur setting in stack pipe so its will go silent !
And d engine upgrade ! Ff are suggested to apply

*mtrt 58.5mm chrome bore >>> higher rpm less friction lower working temperature

*mtrt touring cam >>> match with 58.5 up 61max bore displacement to bring out the power of 155cc mode and release the peak power locked by the stack camshaft bcz the stack camshaft is design for 125cc mode only and lower rpm setting ^_^

*mtrt racing manifold >>> the velocity turbine design to let the air / fuel mixture get more eficient its will save more gas on the daily use bike ! When its upgraded to 155 cc (58.5)

now the power is upgrade almost 3.5 horse power and the next you may need the transmision ! Its dealing with responce but only limited hp/toque changes !

*mtrt racing pulley
*mtrt alloy clutch bell
*mtrt center spring
*mtrt clutch spring
*mtrt torque drive

do you have parts for honda beat?

sir ask ko lang po kung pang scooter type lang po ba ng mc ang mga products nyo? TIA

do you have parts for honda beat?^_^sorry we dnt have the honda beat parts yet ! its under development ba po ! hope fully its will start avail on nov 2nd week ! ^_^sir ask ko lang po kung pang scooter type lang po ba ng mc ang mga products nyo? TIAall scooter in japan and taiwan ! ^_^ 50cc up to 150cc ! ^_^ 250cc up parts are by order basis ! ^_^
honda yamaha suzuki sym kymco pgo ^_^

how much will it cost me if i decided to have the FULL Touring set up? :D By the way my ride is a Kymco Super 8.

Sir do you have parts for yamaha jog 1? thanks

sir, how bout the SYM Jet100 2stoke? any parts?:D
tnx!

sir henson, follow-up ko lang yung forged pistons and valves na binawasan for my cranck yung naligaw eto ulit yung track no. LBC 171021467413 sender: prime venture caloocan mtrt 126 biglang awa caloocan city tel. no. 3636084 receiver allen hipolito received by susan, 332 christopher 2 annex yakal st calamba laguna.....sir, dpat po naka addres kila stycon.... thanks

Sir regg ur needs ! U may keep ur setting in stack pipe so its will go silent !
And d engine upgrade ! Ff are suggested to apply

*mtrt 58.5mm chrome bore >>> higher rpm less friction lower working temperature

*mtrt touring cam >>> match with 58.5 up 61max bore displacement to bring out the power of 155cc mode and release the peak power locked by the stack camshaft bcz the stack camshaft is design for 125cc mode only and lower rpm setting ^_^

*mtrt racing manifold >>> the velocity turbine design to let the air / fuel mixture get more eficient its will save more gas on the daily use bike ! When its upgraded to 155 cc (58.5)

now the power is upgrade almost 3.5 horse power and the next you may need the transmision ! Its dealing with responce but only limited hp/toque changes !

*mtrt racing pulley
*mtrt alloy clutch bell
*mtrt center spring
*mtrt clutch spring
*mtrt torque drive

how much will this set-up cost?

how about the suzuki hayate?

sir meron ba kayo parts for UB's like suzuki honda kawasaki yamaha MC's?

all scooter in japan and taiwan ! ^_^ 50cc up to 150cc ! ^_^ 250cc up parts are by order basis ! ^_^
honda yamaha suzuki sym kymco pgo ^_^

sir, regarding the parts you have for 50cc-150cc. do you have any chance of having parts for gmax 200? like center spring and clutch spring? thank you.

got parts for a honda wave 2008 model?
can you pm me the breakdown of the cost of each parts inclusive of labor?

when converted to touring mode is it ok for everyday city driving without any detrimental effects on the installed "touring" parts?

thanks in advance!

sir, how bout the SYM Jet100 2stoke? any parts?:D
tnx!

up natin. SYM Jet din ang MC ko.:D

how much will it cost me if i decided to have the FULL Touring set up? :D By the way my ride is a Kymco Super 8.M T R T 58.5 UPGRADE ENGINE KIT (8.5up hp)( 6 Month warranty)
(58.5mm Alloy bore + Piston + Ring + Pin + Lock + Head Gasket + Base gasket) Alloy casting Bore up Kit 2450
(MTRT St1 Camshaft 349 Usable Degree) fit for 125~155cc (52.40~59.00mm) Tappet In#8 Ex#10 Latest Duration Design for touring 2450
(V8 Production pipe) Machine shaped stainless front tubbiness stainless end cone w H beam hanger Hi Speed Stable horsepower output 5500
(MTRT Manifold ) Hi velocity Flow big manifold guide and feed maximum density of fuel and air to the Engine 2000
Labor top overhaul machine shop engine carburetor and transmission tuning with Free engine cleaning 950
TOTAL 13,350

all in package Price P-9,800.xxSir do you have parts for yamaha jog 1? thanksyes sir ! jog 50/90/

jog/rs 100 all parts of the engine are avail po ^_^

sir, how bout the SYM Jet100 2stoke? any parts?:D
tnx!jet 100 ! avail upgrade parts

*pulley YCR
*Drive face YCR
*Clutch DS
*Clutch bell MTRT alloy
*DS PIPE
*Racing CDIsir henson, follow-up ko lang yung forged pistons and valves na binawasan for my cranck yung naligaw eto ulit yung track no. LBC 171021467413 sender: prime venture caloocan mtrt 126 biglang awa caloocan city tel. no. 3636084 receiver allen hipolito received by susan, 332 christopher 2 annex yakal st calamba laguna.....sir, dpat po naka addres kila stycon.... thanksI m sorry for the wrong sent of the parts ! sir can you pls cordinate with sir allen ! he is in laguna calamba ! i will give you his contact number ! ^_^ 09274863759 allensir meron ba kayo parts for UB's like suzuki honda kawasaki yamaha MC's?yes we have certain parts for kawasaki suzuki parts !
and we have
yamaha honda upgrade piston cam cdi valve spring valve clutch spring ^_^sir, regarding the parts you have for 50cc-150cc. do you have any chance of having parts for gmax 200? like center spring and clutch spring? thank you.gamx 200 as now we have avail

centerspring 1000/1500 rpm
clutch spring 1000/1500/2000 rpm
^_^

sir henson, is it ok if we're going to use your racing manifold on stock carb? or not?

Thanks sir!

sir how much it will cost if my mio upgrade to touring mode? tnx.

thanks sa rep sir mtrt, ask ko po upgrade nyo for suzuki shogun kaya? tipong pang serbis lang.. thanks:D

sir,

pwede po bang malaman ang mga price nito.

jet 100 ! avail upgrade parts

*pulley YCR
*Drive face YCR
*Clutch DS
*Clutch bell MTRT alloy
*DS PIPE
*Racing CDI

Salamat po.:)

sir mtrt

ok po bang pang touring mode / rat ratan mode yung..

mtrt BV head + mtrt 59mm chromebore + forged piston?

magkano po ba aabutin ng set na to?

pwede rin po by PM nalang tayo usap

thanks po!:)

gmax 200 as now we have avail

centerspring 1000/1500 rpm
clutch spring 1000/1500/2000 rpm
^_^

sir, paPM ng price ng centerspring 1000rpm and clutch spring 1000rpm. tnx

sir for suzuki we have cam cdi and piston nd big carb lng po ^_^

sir thanks for the reply.. pano po umorder and modes of payment?

thanks sa rep sir mtrt, ask ko po upgrade nyo for suzuki shogun kaya? tipong pang serbis lang.. thanks:Dsir for suzuki we have cam cdi and piston nd big carb lng po ^_^sir henson, is it ok if we're going to use your racing manifold on stock carb? or not?

Thanks sir!yes the mtrt manifold is can use in std cyl ! but u may have reach air fuel effect ! ^_^ so u have to tune ur carb when u using it ! ^_^ up natin. SYM Jet din ang MC ko.:D^_^ hello ! the jet 100 parts ! avil
racing pulley
lighten drive face
racing clutch
mtrt alloy clutch bell
big manifold
big carb
racing cdigot parts for a honda wave 2008 model?
can you pm me the breakdown of the cost of each parts inclusive of labor?

when converted to touring mode is it ok for everyday city driving without any detrimental effects on the installed "touring" parts?

thanks in advance!wave 110 ? or 125 po ! ^)^
thanks !sir thanks for the reply.. Pano po umorder and modes of payment?u may order it tru phone transation tru lbc or ap cargo pament tru lbc or metro bank ! ^_^

ang mio sir.?

Sir, 150cc is around 10k ryt, how much po 200cc setup for Kymco S8? possible po ba to? parts avail? TIA!

yes the mtrt manifold is can use in std cyl ! but u may have reach air fuel effect ! ^_^ so u have to tune ur carb when u using it ! ^_^

thank you sir for your reply. you got pm sir! ^_^

Good day sir...

How about for Kymco Dink LX150 what parts are available sir.... and how much it will cost me...

sir good afternoon, meron po kasi akong dio, ano po ba ang pwede kung ikabit para medyo bumilis? bala ko mag laro sa boomland with my dio... thanks..

gud day sir may availble po b kyong mtrt block kit for suzuki step? ok lng b yung 61 bore or 59 bore n lng ano po suggestion nyo?
Sir p PM nman po ng adrress ng shop nyo ng makapasyal tsaka yung price n aabutin with labor n po pra mapag handaan tnks. sa block and piston lng po muna tyo. tnks

sir do you have the touring cam version 5 for nouvo z. im planning to change my stage 1 cam to stage 2 or 3 . the complete package including the valves (intake /exhaust). pls pm me the price including labor cost. thanks.

meron na version 5 na cam?

meron na version 5 na cam?

hindi po sir, kaso hindi ko rin asyado kayang ipaliwanag, para mas clear siguro pwede nyo pong tingnan yung conversation ko with sir mon_xjl sa profile ko po. HTH.

hi MTRT,
pls pm me the price for the gmax 200 centerspring 1000/1500 rpm and clutch spring 1000/1500/2000 rpm..
is there any chance that you will sell a 4 valve block and piston for gmax 200? how much would be the price for this upgrade?
looking forward for your prompt reply..
thanks!

ang mio sir.?
^_^ SORRY SIR ! Whats YOUR question again ?

200 cc ! is little bit dangerius ! ^_^ 180cc sugested 61MM cran with 3mm stroker crankshaft is enought for it po ! ^_^ Good day sir...

How about for Kymco Dink LX150 what parts are available sir.... and how much it will cost me...DINK LX4150 its ! avilable parts for it

61mm alloy bore
pioneers cam
pop poulley
mtrt clutch
^_^ zracer pipe

price pls contact office for quotation po ! ^_^

Sir Henson, I went to your shop kanina and asked for the 61mm bore kit para sa dink 150lx....they said wala daw, Ang pinakita sakin na available is the 72.7mm sheng-e bore kit...

Nabili ko lang is the clutch spring and center spring and a mushroom type filter...

How much po pala is the pioneers cam?? Babalik po ako to get cams also for my dink....

gud day sir may availble po b kyong mtrt block kit for suzuki step? ok lng b yung 61 bore or 59 bore n lng ano po suggestion nyo?
Sir p PM nman po ng adrress ng shop nyo ng makapasyal tsaka yung price n aabutin with labor n po pra mapag handaan tnks. sa block and piston lng po muna tyo. tnks
up for my query .

sir mtrt p pm ng 58.5 n borekit png mio contact no po pwede p lbc n lng tnx.

sir howmuch is ur mtrt bigvalves 28/24?

big carb japan?

pin2mm?

tnx...

up for my query .61mm chromebore kit for hayate 6500, cams 2450. our add: 126 biglang awa st. caloocan city or u can call us @364-6284, 0918-9449999sir howmuch is ur mtrt bigvalves 28/24?

big carb japan?

pin2mm?

tnx...big valve head 9800 , KEIHIN CARB 27MM 3500. OR U CAN CALL US @364-6284, 0918-9449999, OUR ADD: 126 BIGLANG AWA ST CALOOCAN CITY NEAR EDSAsir mtrt p pm ng 58.5 n borekit png mio contact no po pwede p lbc n lng tnx.u can call us @364-6284, 0918-9449999hindi po sir, kaso hindi ko rin asyado kayang ipaliwanag, para mas clear siguro pwede nyo pong tingnan yung conversation ko with sir mon_xjl sa profile ko po. HTH.SIR pls call me 0918-9449999,0922-8187118. para magkaintindihan tau .or txt me tatawagan ktaup for my query .sir ung labor for block is 900 lang po. thanks. or pls call us 0918-9449999meron na version 5 na cam?mtrt cams version 5 is avail, 1850only

Sir gud day! I went to your shop last Saturday and ask for 61mm bore kit para sa dink 150lx eh sabi po nung nagtitinda eh wala daw po... Kailan po kaya magkakaroon at magkano po lahat lahat ang cost para maibudget ko na po including the pioneers cam... Nakabili lang po ako ng Center Spring, MTRT Clutch at POP Pulley.

sir ask ko lang po naka straight mtrt na ung super 8 58.5 chrome bore cams v8 pipe pully at racing clutch and bell 1500rpm na center spring... anu po right jetting sa carbs or just live it stock..and valve clearance.... parang ang hina parin sa kulang sa lakas
salamat po

sir yung v* pipe for s8 ba maingay? kc mas ma ingay pa cya sa 10cat na pipe?

sir ask ko lang po naka straight mtrt na ung super 8 58.5 chrome bore cams v8 pipe pully at racing clutch and bell 1500rpm na center spring... anu po right jetting sa carbs or just live it stock..and valve clearance.... parang ang hina parin sa kulang sa lakas
salamat posir d2 nyo po b pinagawa yan?sir yung v* pipe for s8 ba maingay? kc mas ma ingay pa cya sa 10cat na pipe?hinde, san po place nyo sir?

hinde, san po place nyo sir?baguio city po pro dyan lahat knuha ung mga parts sir

dito po baguio gnawa... sir my help ba ang lighten magneto?

200 cc ! is little bit dangerius ! ^_^ 180cc sugested 61MM cran with 3mm stroker

how much for this setup for S8? TIA!

200 cc ! is little bit dangerius ! ^_^ 180cc sugested 61MM cran with 3mm stroker

how much for this setup for S8? TIA!

g'morning sir! regarding po sa mga tanong nyo po,plz call us at 363-6084 or 364-6284...thank you po:)

waiting po ako sa pm nyo re for my inquiry..
salamat..

magandang tanghali sir tanung ko lng po kung anu po ba

pwd set up sa M.C ko NOuvo Z poh..anu po ba pwede ko

gawin set up at kung anu po mga klangan gamit ko po

service sa work ko at pang rides mdyo naiiwan po kc ako

sa mga ka rides ko..all stock po M.C ko!!

tnx poh w8 ko po ung reply nyu more power po

sa inyu!!

gud pm po sir MTRT! Ive heard alot of positive outcome of the parts/mods you sell. If ever po na may parts/mods na lalabas for honda beat paki PM na lang po thanks.. More power!