|
View Full Version : Pantanggal ng Matte Finish bikermerc March 2nd, 2009, 05:23 PM Dahil sa regular wear and tear of everyday use ng helmet, yung matte finish ng helmet ko ay nagka-bakbakan na at ang pangit na tingnan. Ano po ang magandang pantanggal ng matte finish? .Syiempre yung safe sa helmet? Thanks. d'virus March 3rd, 2009, 03:24 AM hmmm, hopefully maraming maka sagut neto, AFAIK, it is not advisable to put ANY chemical sa helmet at it'll affect yung chemical composition ng shell... ideally, kahit sticker nga should be avoided... pero wait lang tayu sa mga experts... randzborja March 3rd, 2009, 03:43 AM Tinanggal ko rin yung matte finish ng helmet ko last time, Liha na pino at tubig lang katapat :D Tyaga lang talaga sakit kasi sa kamay. bikermerc March 3rd, 2009, 08:31 AM hmm...ang alam ko kasi sa ilalim ng matte finish ay clearcoat din... zathra March 3rd, 2009, 09:18 AM parang me nabasa ako dati na ACETONE ang pantaggal sa matte finish sa helmet. kaso inde ko alam kung safe sa shell ng helmet at kung effective nga. inde ko pa kasi na try sa helmet ko e. :D Glen_27 March 3rd, 2009, 02:19 PM sir balitaan mo ko pag successfull ang pagtanggal mo ng matte finish sa helmet mo. ung akin din tatanggalin ko:) jenjadnaed March 3rd, 2009, 02:52 PM natatandaan ko sir yun ka work ko dati yun helmet nya na zeus, yun matte blue di sinasadyang matapunan ng alcohol... pagpunas nya ng basahin ayun nangupas... tapos ginawa nya... binuhusan na nya ng buo... ayun tanggal yun pag ka matte... tapos parang naging shiny blue yun kinalabasan... :D bikermerc March 3rd, 2009, 03:02 PM natatandaan ko sir yun ka work ko dati yun helmet nya na zeus, yun matte blue di sinasadyang matapunan ng alcohol... pagpunas nya ng basahin ayun nangupas... tapos ginawa nya... binuhusan na nya ng buo... ayun tanggal yun pag ka matte... tapos parang naging shiny blue yun kinalabasan... :D salamat kumpadre...try ko muna alcohol hehehe...virgin coconut oil kaya?:D meron ginamit nga pala si pareng paperbike, kaso hindi kon alam kung ano. vencenexus112 March 3rd, 2009, 04:36 PM Dahil sa regular wear and tear of everyday use ng helmet, yung matte finish ng helmet ko ay nagka-bakbakan na at ang pangit na tingnan. Ano po ang magandang pantanggal ng matte finish? .Syiempre yung safe sa helmet? Thanks. ako sir scotch brite na rubbing pad babad sa tubig na me sabon tapos dahan dahan scrub yung helemt para matanggal matte color. good as new ngayun yung helmet ko. matte dati naging glossy Hakz March 3rd, 2009, 04:52 PM if i remember it correctly merong thread na ganito si sir Col.Ted. calling calling! :D meron syang ginamit na panlinis, which works. daw. never tried it though. bikermerc March 3rd, 2009, 05:02 PM calling col.ted.... kaloi March 3rd, 2009, 05:32 PM I remember this... I followed Col. Ted's suggestion and it worked on my Zeuz 508W. If I remember right, I used lacquer thinner and a piece of cloth. But I strongly suggest that you do wear some gloves when doing so because exposing your hands to the thinner is not advisable. Hope this helps! This was the end-result after the job: http://i232.photobucket.com/albums/ee135/kaloiacob/myzeus.jpg Hakz March 3rd, 2009, 05:46 PM yep, tenks sir kaloi, tama nga laquer thinner nga. :clap: leslhanl March 3rd, 2009, 05:57 PM eto nagawa ko last month.. use the following: 1. cotton 2. zonrox, clorox...basta ganitong klase 3. CD, DVD.... 1 step: apply zonrox or clorox sa matt well spread yung hindi tumutulo then leave it to penetrate like 2 minutes 2nd step: use the CD or DVD :D pang ukit.... repeat steps till wala na ang matt. ganun lang kasimple.:clap: abercrombie March 3rd, 2009, 08:19 PM my thread si col. ted nian eh.. yung DIY daw na tinuro sa kanya nung clubmate nia.. yan nga ata yung sinasabi ni kaloi.. :rolleyes: malufeet March 5th, 2009, 09:15 AM eto nagawa ko last month.. use the following: 1. cotton 2. zonrox, clorox...basta ganitong klase 3. CD, DVD.... 1 step: apply zonrox or clorox sa matt well spread yung hindi tumutulo then leave it to penetrate like 2 minutes 2nd step: use the CD or DVD :D pang ukit.... repeat steps till wala na ang matt. ganun lang kasimple.:clap: +1 to kita ko na resulta nito ang masasabi ko lang ay :clap::clap: bikermerc March 5th, 2009, 09:21 AM kasalukuyang inaalis kuna ang matte sa helmet ko using the cd/dvd method of papi leshanl.hindi kuna ginamitan ng any liquid solution kasi napansin ko madali narin matanggal yung matte.tsaka kuna gagagmitan ng liquid solution kapag final linis na... Glen_27 March 5th, 2009, 10:04 AM @les.. bro, hindi ba makakagasgas ung cd? leslhanl March 5th, 2009, 10:09 AM so far pre wala naman..nakatatlo na kami na tinanggal:clap: yung sa pinakaside lang konting tiaga kase malake ang cd...kung pwed ka bumali dun sa cd pwede heheh Glen_27 March 5th, 2009, 10:28 AM cge cge, susbukan ko yan mmya pag-uwi. kagabi kasi, gumamit ako ng alcohol at cloth. nwala ung mga gasgas, pero may matte pa din. pero look new ung caberg ko ah!:clap: @bikermerc.. sir, balitaan mo ko mmya sa resulta.:banana: d'virus March 5th, 2009, 10:33 AM ma ask ko lang mga bosing: wont those harsh chemical, affect the structural integrety of the helmet??? i was told na dont put anything stronger than warm soapy water... Glen_27 March 5th, 2009, 11:02 AM @d'virus... tingnan nation sir kung ano mangyayari sa helmet ko... tapos balitaan kita:) d'virus March 5th, 2009, 11:06 AM @d'virus... tingnan nation sir kung ano mangyayari sa helmet ko... tapos balitaan kita:) tnx, ask a lng namn ako kse, type ko ring pinturahan ulit yung sakin... ipa- air brush... sabe nung iba, nagiging brittle daw ang shell... bikermerc March 5th, 2009, 11:21 AM papa les, salamat sa "cd" idea... papi glen...hindi nakakgasgas yung cd kasi pino naman ang edges nya.so far 95% na tapos ko.yung mga latak ng dikit nalang kelangan tanggalin...sa tingin ko pwede na ang oil or wd-40.magaling makatanggal ng residue yun eh. Glen_27 March 5th, 2009, 11:25 AM @d'virus....un nga ang magiging consequence nun sir.... may tendency maging brittle ung shell.... Glen_27 March 5th, 2009, 11:34 AM papa les, salamat sa "cd" idea... papi glen...hindi nakakgasgas yung cd kasi pino naman ang edges nya.so far 95% na tapos ko.yung mga latak ng dikit nalang kelangan tanggalin...sa tingin ko pwede na ang oil or wd-40.magaling makatanggal ng residue yun eh. tlg?:clap: ayos! titirahin ko na din ung akin mmyang break ko.:) fafs may email nga pala ako sau, pacheck nlng.:s @les.. nice idea fafi!:clap: salamat in advance. hehehe.... zathra March 5th, 2009, 12:31 PM dapat me step by step pictures para me idea ung iba kung pano gawin. :D picture.....picture.....picture.......picture...... d'virus March 5th, 2009, 12:35 PM dapat me step by step pictures para me idea ung iba kung pano gawin. :D picture.....picture.....picture.......picture...... :clap:.. oo nga... malaking tulong yun... i'm starting narin mag "mod" ng helmet ko, nilagyan ko pa lang ng tint fog-city insert ang visor.. :D bikermerc March 5th, 2009, 12:50 PM subukan ko maghpost ng pics...patapos na kasi eh gl3nborj March 5th, 2009, 03:22 PM hmmm, hopefully maraming maka sagut neto, AFAIK, it is not advisable to put ANY chemical sa helmet at it'll affect yung chemical composition ng shell... ideally, kahit sticker nga should be avoided... pero wait lang tayu sa mga experts... Nakakatawa nga bro, ganyan din nakasulat sa zeus na helmets. Pero tinira nila ng laquer na pintura. bikermerc March 6th, 2009, 10:20 AM eto po mga rough pics on how to remove the matte using the "cd" method... zeus modular gray matte finish....patapos na kasi eto kaya small area nalang tatanggalin. using your cd, slowly scrape the matte finish off the helmet...take note that this helmet has a top clearcoat under the matte finish...i dont know about other brands. http://i62.photobucket.com/albums/h112/maloymerc/IMG_1950.jpghttp://i62.photobucket.com/albums/h112/maloymerc/IMG_1951.jpg http://i62.photobucket.com/albums/h112/maloymerc/IMG_1952.jpghttp://i62.photobucket.com/albums/h112/maloymerc/IMG_1953.jpg after alot of patience and elbow grease...wipe away all residue and your done! Nice and Shiny! http://i62.photobucket.com/albums/h112/maloymerc/IMG_1955.jpg Glen_27 March 6th, 2009, 10:40 AM ayos ah! look new:clap: ung caberg ko pres, ang hirap tanggalin.......:o bikermerc March 6th, 2009, 10:56 AM baka mas matibay na klase ang matte finish nyan sir... you might have to use a liquid solution to soften the matte... Glen_27 March 6th, 2009, 11:00 AM tingin ko nga sir... nung ginamitan ko ng alcohol, nwala ung mga gasgas sa matte. look new as matte. nung ginamitan ko kahapon ng cd, ayun madikit ung matte nya at mahirap tanggalin. ang dumi tuloy tingnan...:o di bale sir, kuhanin ko nlng sa tyaga, gamitin ko nlng muna ung isa kong helmet. hehehe...:clap: d'virus March 6th, 2009, 02:04 PM ayut ah... tenks bikermerc... :) mistahsuave March 6th, 2009, 02:35 PM Dahil sa regular wear and tear of everyday use ng helmet, yung matte finish ng helmet ko ay nagka-bakbakan na at ang pangit na tingnan. Ano po ang magandang pantanggal ng matte finish? .Syiempre yung safe sa helmet? Thanks. ung ginamit ko sa helmet ko, ung manipis na prepaid card, tyagaan lang, tapos basain mo ng konti...ang ganda ng ilalim nyan, glossy |
