Mga sir just wanted to share . . .

para sa mga mahilig sa knee drag but walang pambili ng knee sliders eto ang para sa inyo. ..

Items to be used :
1 Chopping Board (Large)
1 Small Bottle of Rugby
1 Yard of Velcro straps
1 Pentel Pen
Tape Measure
Scissor
Metal Cutter (lagaring bakal)
Gas Stove. .:D
and Pliers

Total Cost of the project is :
250 Pesos (Good For 2 pairs) *4 Pieces*


Step 1
Prepare your tools and look for an area where you can work comfortable

Step 2
Using your marker make a square drawing 4 x 4 then using the metal cutter cut the chopping board. .

in my case i used my used teknic knee sliders for reference.
http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022001.jpg
http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022002.jpg
http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022003.jpg


ill continue the steps in a while im still working on it. :)

Step 3
Using your Gas Stove
Hold the Chopping board on top of the fire then when its hot enough to bend look for a flat bar and push the chopping board on both sides so that it will bend.
http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022004.jpg
http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022005.jpg
http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022005-1.jpg

Step 4 (Optional)
I painted the chopping board for Aesthetics only. .
http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022006.jpg
http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022007.jpg

Step 5
Measure your chopping board and cut the MALE Velcro straps according to the side of your chopping board. .while doing this apply rugby at the back of your chopping board and let it dry for a few minutes before putting the Velcro straps at the back. .

http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022008.jpg
http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022009.jpg

http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022010.jpg
http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022011.jpg
http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022012.jpg


and this is the finished product

http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081022013.jpg

pasubscribe po...

sir di po kaya ito matangal kung magslide na?



pero astig ah...galing...

sir di po kaya ito matangal kung magslide na?



pero astig ah...galing...

Hindi po sir. . been using this for awhile and i never had any problems. . ;)

(local underbone racers uses this during their practice)

here was my prototype before. . :)

http://i15.photobucket.com/albums/a362/Mr_yoso1982/Kakashi/DSC00314.jpg

how much did it cost for the materials and how long did it take to make it? thats pretty cool man, i spend like $45 for knee sliders and it would be cool if i could make my own.

how much did it cost for the materials and how long did it take to make it? thats pretty cool man, i spend like $45 for knee sliders and it would be cool if i could make my own.

Total Cost is less than $5 and it took me an hour finish the sliders. :clap:

and if you have a used knee sliders you can use the Velcro strap for the chopping board. :)

Eto na po itsura niya mga sir. . :clap:

http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081023.jpg
http://i15.photobucket.com/albums/a362/Mr_yoso1982/20081023001.jpg

uy may extra pair kpa pla skorin ko na lng yan xtra pair bro.

uy may extra pair kpa pla skorin ko na lng yan xtra pair bro.

sumama ka sa 16 bibigay ko sayo yung extra. . :D dun ko na aabot para sure. . :O

bro asahan ko sa 16 yan ha yan gagamitin ko./...

thank you sir for sharing..sabi na nga eh pwede pala gamitin ung choping board na un..mas ok siguro ung mas makapal ng konti jan sa chopping board.

sir san pwede makabili nung parang butterly thingy na un? ung piece na misming idinidikit sa pants? velcrow pa rin ba un sir?

Total Cost is less than $5 and it took me an hour finish the sliders. :clap:

thats cool man, im going to have to try that out one day. ive been eating through my pucks like crazy lately...

nice! very nice! tipid mode. hehehehehe.

bka pumunta din ako sa 16. kaso ayoko sumabay sa inyo. mga pro na kau e. hehehehehe.

pa turo naman dyan fafi mac at desk! :D

Ma mi miss mo to mac pag may sponsor ka na.

thank you sir for sharing..sabi na nga eh pwede pala gamitin ung choping board na un..mas ok siguro ung mas makapal ng konti jan sa chopping board.

sir san pwede makabili nung parang butterly thingy na un? ung piece na misming idinidikit sa pants? velcrow pa rin ba un sir?

wala akong alam na mabibilhan nung malaki. . pero sabi sakin sa divisoria daw meron kaso wala akong time saka ang layo eh. .:D

bili ka nalang sir sa mga patahian nung strip na velcro.

thats cool man, im going to have to try that out one day. ive been eating through my pucks like crazy lately...

you should try this one out! aside from it is cheap. . you can actually customize the design. . :)

nice! very nice! tipid mode. hehehehehe.

bka pumunta din ako sa 16. kaso ayoko sumabay sa inyo. mga pro na kau e. hehehehehe.

pa turo naman dyan fafi mac at desk! :D

gawa ka na sir bago mag 16. . :)

wow!! nice tip sir... DIY na, mukhang durable pa!
san ka pa?!:D

wow!! nice tip sir... DIY na, mukhang durable pa!
san ka pa?!:D

hehe totoo yan sir. . di hamak na magkasing tibay sila ng orig na knee sliders. :)

.



ayos to ah!!!

pwede kayang gamitin sa halip na chopping board ay gulong ng sasakyan? kapag nagasgas kase yan sigurado lilitaw pa rin ang puting kulay......pero kung gulong na makapal, magasgas man sigurado itim pa rin...:D


pero galing nito...5 strars!!! :clap:



.




.

Salamat sir

gawa ka na sir bago mag 16. . :)

wala kc akong racing pants e na paglalagyan nyan sir. :D

pde ba yan sa knee pads lng? hehehehe.

wala kc akong racing pants e na paglalagyan nyan sir. :D

pde ba yan sa knee pads lng? hehehehe.

pwede bro. . .yan ginagawa namen noon nung wala pa kameng suit. . :)

http://i15.photobucket.com/albums/a362/Mr_yoso1982/kneedrag.jpg
http://i15.photobucket.com/albums/a362/Mr_yoso1982/H_KaKaShi023.jpg

eto bro. .pole position palang gamit ko dyan. . ang ginawa ko lang noon eh nung naubos na yung knee protector alisin mo lang yun tapos dun mo ilagay yung FEMALE na velcro then same dun sa chopping board. . and there you go. :)

pwede bro. . .yan ginagawa namen noon nung wala pa kameng suit. . :)

pa-share naman sir how to do this :)


Ride Safe and Defensively! :banana:

pa-share naman sir how to do this :)


Ride Safe and Defensively! :banana:

alisin niyo lang po yung knee protector kasi dun niyo po ilalagay yung FEMALE na velcro strap para maikabit yung chopping board.

galing tlga ni sir mac..

alisin niyo lang po yung knee protector kasi dun niyo po ilalagay yung FEMALE na velcro strap para maikabit yung chopping board.

ok sir thanks! :)


Ride Safe and Defensively! :banana:

ok sir thanks! :)


Ride Safe and Defensively! :banana:

Gumawa nako para sa 16 sir. . :D

Gumawa nako para sa 16 sir. . :D

pa post naman sir ng pix, para makopya he he :D


Tia! :)

Ride Safe and Defensively! :banana:

eto bro. .pole position palang gamit ko dyan. . ang ginawa ko lang noon eh nung naubos na yung knee protector alisin mo lang yun tapos dun mo ilagay yung FEMALE na velcro then same dun sa chopping board. . and there you go. :)

ahh gets ko na. diba nakatahi lng ung knee protector dun sa parang foam. tpos lalagyan ng female velcro. tpos pde na ikabit ung DIY na knee sliders.

galing! :clap: ma try ko nga pag pudpod na ung knee pads ko. :D

ahh gets ko na. diba nakatahi lng ung knee protector dun sa parang foam. tpos lalagyan ng female velcro. tpos pde na ikabit ung DIY na knee sliders.

galing! :clap: ma try ko nga pag pudpod na ung knee pads ko. :D

Tumbok mo papi! :D

(kita ko video niyo sa youtube ah) :)

Tumbok mo papi! :D

(kita ko video niyo sa youtube ah) :)

yaaak! nakakahiya! mga beginners lng po kami. papaturo nga kmi sa iyo fafi e.

si fafi desk ang galing professional na! :clap:

Im currently working on a new design. . :D

Im currently working on a new design. . :D

uyy! aabangan ko yan! :D :clap:

nyahh newbie lng din ako nun lalo na sa vid na yun oi mac basta yung skin abot mo an sa sat sa practice session natin sa boomland ha..

Ang galing a!!!

Hmmm....

Full battle gear kaya....

Hehe... Joke lang, dun na ako sa sigurado pagdating sa body gear.

@TS

pa-patent nyo sir mga imbento nyo, baka pedeng pagkakitaan, hehe joke lang sir!

Galing kasi e!!!

Ang galing a!!!

Hmmm....

Full battle gear kaya....

Hehe... Joke lang, dun na ako sa sigurado pagdating sa body gear.

@TS

pa-patent nyo sir mga imbento nyo, baka pedeng pagkakitaan, hehe joke lang sir!

Galing kasi e!!!

hehe. . salamat sir. :)